Disconnecting The Av 700 Tv From Your Computer - Archos AV 700 TV User Manual

59
®
Windows XP
Please verify* that you have Windows
have Windows Media ® Player 10 (WMP10) installed on your computer. This way, you can take advantage of
connecting it as a ' Windows Device '. Connect it to your PC as enumerated above and you can then see the
AV 700 TV in Windows ® Explorer and WMP10. Without Windows
Media ® 10, you cannot use it as a Windows
Windows ® ME & 2000 below.
* Right-click on 'My Computer' select 'Properties', and then look in the tab labeled 'General'. It should say "Service Pack
1" or higher.
Windows ® ME and 2000
Macintosh ™ OS X
If you have OS X, you must update to version 10.2.4 or newer. You must also change the AV 700 TV's
USB Port setting to ' Hard Drive '. From the main menu, go to the setup action icon and then to
System and USB Port and change it to ' Hard Drive '.
You will now simply plug the AV 700 TV into your Macintosh
seconds, the AV 700 TV will be recognized as a mass storage device (Hard Drive) and mount on the
desktop. You can now use the hard drive called AV 700 TV like any other external hard drive.
60

17.3 Disconnecting the AV 700 TV from your Computer

17.3 Disconnecting the AV 700 TV from your Computer
Windows Device Mode
If the AV 700 TV is connected to your computer as a Windows Device, verify that no data is being transferred
between your AV 700 TV and your computer (the HDD light on your AV 700 TV is not fl ickering). You can
now safely unplug the USB cable from your AV 700 TV and/or computer.
Hard Drive Mode
If the AV 700 TV is connected to your computer as a hard drive, DO NOT SIMPLY PULL OUT THE
USB CABLE AT ANY TIME!
WARNING: You must properly remove (unmount) your AV 700 TV from the computer before
disconnecting the USB cable to avoid loss of data or freezing the computer and/or the AV 700 TV.
Hard Drive Mode & Windows
To safely disconnect the AV 700 TV hard drive, click on the system tray remove icon (green arrow as shown
below) and follow the instructions. Wait until you get a message saying that you can safely unplug the device
before disconnecting the USB cable.
1. The safe remove icon is in the system tray next to the clock.
®
Windows XP
2. Click on the icon to eject (unmount) the AV 700 TV from the computer and select the 'Safely remove'
message.
3. There will be a message indicating that it is now safe to disconnect
the AV 700 TV. You can now safely unplug the USB cable from your
AV 700 TV and/or computer.
60
®
XP and it is updated it to at least, Service Pack 1 . You must also
® recognized 'Device' and will have to follow the instructions for
Attention: Before connecting the AV 700 TV to your computer with the
USB cable, go to the setup action icon and then to System and USB
Port and change it to 'Hard Drive'.
When connected to your computer, the AV 700 TV will be recognized as an external
Hard Drive and display automatically within a few seconds of being connected. You
will see a new drive letter, such as E: in My Computer called AV 700 TV. You can now
use the hard drive called AV 700 TV like any other external hard drive. Simply access
®
it using Windows Explorer to drag and drop fi les to and from the AV 700 TV's hard
drive.
®
®
Windows 2000 & Windows
® XP Service Pack 1 (a free update) or Windows
®
as enumerated above, and within a few
®
ME
59