Subscribe to Our Youtube Channel
Related Manuals for Staples Carder 59236V
Summary of Contents for Staples Carder 59236V
- Page 1 59236V Carder Patents EU 000656616-0001 Canada CA-118893 Instructions Product Support 800-425-0049...
- Page 2 Carder Chair 800-425-0049 Product Support 800-425-0049...
- Page 3 Carder Chair Pneumatic Seat Height Adjustment • Pull up on Lever 1, located on the right side of the seat. • Lower or raise the seat to your desired height, then release the • lever to lock the seat height. •...
- Page 4 Carder Chair PART F 59236V Carder Patents Yellow Screw (x 6) Blue Screw (x 2) Blue Screw (x 2) EU 000656616-0001 Canada CA-118893 Plastic Insert (x 1) Green Screw (x 2) Instructions Product Support and Parts 1-800-733-4000 (x 1) Caster (x 5) Base (x 1) Gas Lift (x 2)
- Page 5 Carder Chair (x2) (x1) (x2) (x2) Product Support 800-425-0049...
- Page 6 Carder Chair Back Armrest To secure seat into base, sit down on chair. See easy adjustment instructions to ensure custom comfort. Seat Seat Plate Assembly Gas Lift and Telescopic Cover Base Caster To adjust the back height of the chair turn knob counterclockwise to loosen and adjust back height.
- Page 7 In the event of a defect in the design, assembly, materials or workmanship of this product within 7 years from the original date of purchase, Staples will replace any such defective part. Parts included under this warranty are non-moving metal components, chair frame, pneumatic cylinder, upholstery and all other parts.
Need help?
Do you have a question about the Carder 59236V and is the answer not in the manual?
Questions and answers
The tilt tension cylinder knob with not turn left or right
The manual does not provide specific instructions for fixing a tilt tension cylinder knob that won't turn. However, you can try the following general troubleshooting steps:
1. Check for Obstructions – Ensure there is no debris or damage around the knob preventing movement.
2. Apply Gentle Force – Try turning the knob slowly and firmly without excessive force to avoid damage.
3. Lubricate the Mechanism – Apply a small amount of lubricant to the knob's base to loosen any stuck parts.
4. Loosen or Tighten While Seated – Sit in the chair and adjust the knob while applying slight pressure to the backrest.
5. Inspect for Damage – If the knob is broken or stripped, it may need replacement.
If the issue persists, contact Staples Product Support at 800-425-0049 for further assistance.
This answer is automatically generated