Stealth Cam STC-ADX User Manual page 29

•
When you have completed the testing the coverage area, open
the front housing and slide the power tog
to ON position. This will exit the test mode. The camera will
then enter count down mode for 1 minute and front green
indicator will start continuous blinking giving you one minute t
leave the coverage area. Then the camera will enter PIR
detection mode.
Using t he camera in PIR
•
Mount the camera to tree or other sturdy object using either
two supplied tree screw or mounting
mounting suggestions section in this manual)
•
Open the front housing and move the switch to the ON position
•
The camera's green test light will begin blinking
count down mode. This is your indication to leave the coverage
www.stealthcam.net
STC-ADX / STC-ADXRT
detection mode
strap (Please refer to the
Toll Free 877-269-8490
gle switch from TEST
o
.
and enter
29