Advertisement

Quick Links

rohaus.com
Pro Glide Eco
Steam Generator
Instruction
RI1010B
1
Pro Glide Steam Generator_UK_AW.indd 1
27/06/2014 15:13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro Glide Eco RI1010B and is the answer not in the manual?

Questions and answers

Summary of Contents for rohaus Pro Glide Eco RI1010B

  • Page 1 Pro Glide Eco Steam Generator Instruction RI1010B Pro Glide Steam Generator_UK_AW.indd 1 27/06/2014 15:13...
  • Page 2: Table Of Contents

    Introduction Congratulations on the purchase of your Introduction Rohaus Safety Precautions Rohaus Steam Generator. Features of your Rohaus Pro Glide Steam generator Combining Dutch technology, European Using your Pro Glide Steam generator engineering, 21st century design and Care and Cleaning...
  • Page 3: Rohaus Safety Precautions

    Rohaus Safety Precautions • Do not leave a hot iron reach of children. Rohaus is very safety conscious when • Never leave an appliance unattended If they come into contact with a hot iron designing and manufacturing consumer while in use. it could lead to serious burns.
  • Page 4: Features Of Your Rohaus Pro Glide Steam Generator

    Features Of Your Rohaus Pro Glide Steam Generator Constant Steam Button Thermostat light When ironing for long periods the constant The thermostat light illuminates to indicate steam button can be activated to produce that the iron sole plate is heating, and goes...
  • Page 5: Using Your Pro Glide Steam Generator

    However in very hard water areas, Rohaus recommends the use of distilled water, or water which has been demineralised. Do not fill the iron with fabric conditioner, starches or any other solution as these will damage the steam mechanism.
  • Page 6 The thermostat light (as shown in Figure 3) 5. When the steam selection illuminates Refilling the tank during ironing iron again, any button or trigger can be will illuminate AMBER to indicate that the GREEN, the unit is ready to use. When the water in the tank falls below the pressed to reactivate the boiler.
  • Page 7: Care And Cleaning

    Care And Cleaning After each use Calc Clean Reminder 4. Remove the calc clean valve completely. 1. To flush the boiler, turn the unit off and wait for it to cool completely (approx 2 hours). 1. Turn the power off and remove the plug Mineral deposits in tap water solidify when See figure 8.
  • Page 8: Troubleshooting Guide

    Troubleshooting Guide Ironing Tips Tricks Tip # 1 - Iron shirts like a pro Tip # 7 - Sort types of fabric Problem Possible Reason Solution Start with the collar, working from the outer Sort articles to be ironed according to the type edges into the middle.
  • Page 9: Ironing Chart

    Ironing Chart Fabric Temperature Steam Settings Eco Settings Ironing Recommendation Settings (SR8710) Acrylic • Dry iron on wrong side Acetate • Dry iron on wrong side while still damp Off. or use spray to dampen Silk •• Iron on wrong side. Use an ironing cloth to prevent shine marks Nylon ••...

Table of Contents