Installation procedure
1. Install the new base cover assembly in place
secured under the base cover assembly.
2. Then, tighten the screws to secure the base cover assembly
Wireless WAN card (for selected models)
The following information is only for the computer with user-installable modules.
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the wireless WAN card. Otherwise, the wireless WAN card
might get damaged.
For access, do the following:
40
L13 Gen 3, L13 Yoga Gen 3, S2 Gen 7, and S2 Yoga Gen 7User Guide
. Ensure that the latches of the base cover assembly are
1
.
3
and print the following instructions.