Morris MR-123489 Easy Assembly And Operation Instructions

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
MR-123489 Vintage Doll
Please follow the step by step guide and enjoy your Vintage Doll!
PARTS LIST
A. Base x 1
B. Support poles x 2
C. Hip Frame x 1
A
D
ASSEMBLY INSTRUCTIONS
Locking Pin
Click
Means It's
Locked
B B
Back
Right
A Left
Front
STEP 1
Note: Throughout the instructions, right and left are relative to the character.
Attach the (B) Support Poles to the (A) Base as shown and secure by aligning the quick connect push buttons into the pre-drilled holes as
shown in Figure 1.
Attach the (C) Hip Frame to the (B) Support Poles using the available quick connect push buttons and pre-drilled holes as shown in Figure 2.
Lower the (D) Hip Hoop down over the (C) Hip Frame and slide through the slots located on the (C) Hip Frame as shown in Figure 3.
Attach the (E) Upper Body to the (C) Hip Frame and secure by aligning the quick connect push button into the pre-drilled hole as shown in
Figure 4.
D. Hip Hoop x 1
E. Upper Body x 1
B C
E
C
B B
1
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store
this product in its original packing. Keep away from heat and moisture.
WARNING
This item is not a toy and should be used for decoration only. This item
contains small parts that can be a choking hazard. Keep all plastic and
wire parts away from children. This product is intended for people ages
14 and up.
Please read all instructions carefully before assembling. Save this
instruction sheet for future reference.
D
C
2
E
C
3 4
1/2