Texsport Item 01085 Instructions

Thank you for purchasing this Texsport shelter. Please read and understand each step of the set-up instructions. We encourage you to set-up this
shelter at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy
your new shelter and that it will give you many years of camping pleasure.

PARTS LIST:

A ......1 Shelter skin
B ......4 Sets of thick leg poles
C ......2 Sets of thin roof poles
D ......Stakes, clews and
guy ropes

NOTE:

Prepare your camp site by removing all
sharp stones, twigs, etc. The site should
be flat and have no depressions that
could collect rain water.
STEP 1 - Spread out shelter skin.
STEP 4 - Insert the thin roof pole
into the thick leg pole.
STEP 7 - Snap the speed clips onto
the thick leg poles of the shelter.
Hilo Hut Privacy Shelter
o not apply excessive force to this product.
D
STEP 2 - Assemble the 2 sets of
thin roof poles and push them
through the roof sleeves.
STEP 5 - Insert the pin and ring at
the bottom of this pole. Repeat
STEP 3 & 4 for the opposite leg
pole, and insert pin and ring.
STEP 7 - Stake down all 4 corners
of the shelter at the rings.
INSTRU TIONS
Item 01085
C
B
A
STEP 3 - Assemble one thick leg
pole. Start at the bottom of the
shelter skin and push it up through
the sleeve.
STEP 6 - Repeat STEP 3. 4 and 5 for
the other 2 legs poles. Tie the thin
roof poles with attached ties to
secure.
STEP 8 - This is what your shelter
should look like.