Table of Contents
Advertisement
Quick Links
Document
ba-msf-en2336
Page 1 of 10
Original version of the operating instructions
For
Spieth locknuts
(precision locknuts)
The Operating Instructions are also available for download at www.spieth-me.de. In case of any questions, please
contact Spieth-Maschinenelemente GmbH & Co. KG directly.
Legal:
Spieth-Maschinenelemente GmbH & Co. KG, Alleenstraße 41, D - 73730 Esslingen
Phone +49 711 930730 0 - Fax +49 711 930730 7
E-Mail: info@Spieth me.de - Web: www.spieth-me.de
KG: Esslingen HQ, Stuttgart county court, company register sect. A 210689
PhG: Spieth-Beteiligungs-GmbH, Esslingen HQ, Stuttgart county court, company register sect. A 210636
Managing director: Dipl.-Ing. Alexander Hund
Previous document: ba-msf-en1815
©Spieth
Proprietary
Successive document: N/A
notice
Created: 15 Sep 2023/Fd
ISO 16016
Checked: 15 Sep 2023/Ax
Operating Instructions
MSF
Series
MSF
Components
MSF 25x1.5
MSF 40x1.5
MSF 55x1.5
MSF 60x2
MSF 70x1.5
MSF 75x2
MSF 100x2
See
www.spieth-me.de/english/service-download/catalogue-instructions/
For any questions, requests or suggestions, please contact
info@spieth-me.de
MSF 30x1.5
MSF 35x1.5
MSF 45x1.5
MSF 50x1.5
MSF 55x2
MSF 60x1.5
MSF 65x1.5
MSF 65x2
MSF 70x2
MSF 75x1.5
MSF 80x2
MSF 90x2
Advertisement
Table of Contents
Related Manuals for SPIETH MSF Series
Summary of Contents for SPIETH MSF Series
- Page 1 MSF 80x2 MSF 90x2 MSF 100x2 The Operating Instructions are also available for download at www.spieth-me.de. In case of any questions, please contact Spieth-Maschinenelemente GmbH & Co. KG directly. Legal: Spieth-Maschinenelemente GmbH & Co. KG, Alleenstraße 41, D - 73730 Esslingen Phone +49 711 930730 0 - Fax +49 711 930730 7 E-Mail: info@Spieth me.de - Web: www.spieth-me.de...
-
Page 2: Table Of Contents
Page 2 of 10 About the operating instructions for Spieth Locknuts These operating instructions enable safe and efficient handling of Spieth locknuts. Prior to performing any tasks, ensure that your staff have carefully read and fully understood these operating instructions. -
Page 3: Information About Spieth Locknuts
Secure the machine against accidental power-up! Prior to commissioning the machine, install all safety devices! Only expert personnel are allowed to perform assembly work on Spieth locknuts. Using Spieth locknuts is only admissible according to specifications. Spieth-Maschinenelemente GmbH & Co. KG assumes no liability for violations of the operating instructions or safety notices. -
Page 4: Description Of Spieth Locknuts
Spieth MSF series locknuts Spieth MSF series locknuts are assemblies consisting of locknut bodies and clamping screws. The thread inside the locknut body is interrupted by a groove, separating the locknut body into a load and a locking part. A diaphragm connects load and locking part. -
Page 5: Intended Use
In case operating conditions change, it is mandatory to check if the locknut is still suitable for further use. Spieth locknuts need to be handled with care, assembled correctly, and used as intended to achieve their full functional potential. Prior to working with our locknuts, please read these operating instructions carefully. In particular, please follow all relevant safety notices. -
Page 6: Storage And Shelf Life Of The Spieth Locknuts
The preservative used is compatible with all conventional machine oils. If in doubt, check the preservative's compatibility. For an optimum mode of action of Spieth locknuts, remove the thin wax-like film of preservative from the contact surfaces using a lint-free cloth. Directly afterwards, use machine oil without friction-reducing additives to lightly oil the component and protect it from corrosion. -
Page 7: Ambience/Environment
3. Tightening • 4. Locking For an optimum mode of action of Spieth locknuts, perform all four assembly steps in the specified order. Caution! To apply the locking force, use only original Spieth clamping screws. Do not actuate the clamping screws until the nut thread has been fully screwed onto the spindle thread. - Page 8 . Lock Spieth locknuts only if used with original Spieth clamping screws and if the nut thread is fully screwed onto the spindle thread.
-
Page 9: Using Spieth Locknuts
6 Disassembling Spieth Locknuts If handled correctly, Spieth locknuts can be reused several times. Due to the adjustments made, once a locknut has been locked onto a spindle thread you can only reuse it on the same thread after they have been disassembled. -
Page 10: Disposing Of Spieth Locknuts
You can easily reorder Spieth locknuts by entering the component designation imprinted on the nut body and the batch number. Locknut body and clamping screws of a Spieth locknuts are made of steel. At the end of their operating life, clean metal parts and dispose of as scrap metal.
Need help?
Do you have a question about the MSF Series and is the answer not in the manual?
Questions and answers