Installing The Wall-Hanging Bracket - Panasonic LZ2000H Series Operating Instructions Manual

Hide thumbs Also See for LZ2000H Series:
Table of Contents

Advertisement

Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Remove the assembly screws B from the pedestal.
2 Pull out the pedestal from the TV.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation
Rear of the TV
400 mm
300 mm
(View from the side)
Depth of screw
minimum: 13 mm
maximum: 41 mm
Diameter of screw
M8
Screw for fixing the TV onto the wall-
hanging bracket (not supplied with the
TV)
Warning
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure the
wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
11
English

Advertisement

Table of Contents
loading

Table of Contents