Advertisement
Quick Links
ELECTRIC HAND TOOL
ACCESSTYLE
ENGRAVING MACHINE
Model ECE-A/130W/FPCS
USER MANUAL
Dear buyer! Thank you for purchasing an Accesstyle brand tool. All our products are manufactured to the highest
quality requirements.
We hope that our tool will fully meet your expectations.
For long life, efficient and safe operation, please read this manual carefully and keep it for future reference.
When purchasing a product:
- require checking its operability by trial closing, as well as completeness, according to the delivery set given in
this manual;
- make sure that the warranty card is properly executed, contains the date of sale, the stamp of the store and the
signature of the seller;
Attention! Power tools are hazardous equipment. To avoid electric shock, fire and/or serious injury you need
STRICTLY respect the warnings and instructions. Read all safety warnings and all instructions before operating a
power tool. Save all warnings and instructions for future reference
Advertisement
Related Manuals for AccesStyle ECE-A/130W/FPCS
Summary of Contents for AccesStyle ECE-A/130W/FPCS
- Page 1 ENGRAVING MACHINE Model ECE-A/130W/FPCS USER MANUAL Dear buyer! Thank you for purchasing an Accesstyle brand tool. All our products are manufactured to the highest quality requirements. We hope that our tool will fully meet your expectations. For long life, efficient and safe operation, please read this manual carefully and keep it for future reference.
- Page 2 1. General information 1.1 Hand-held cordless engraving machine (hereinafter referred to as engraver) is a high-quality precision tool that, using a wide range of attachments, can perform various work on small items (blanks): grinding, engraving, milling, cutting, cleaning and polishing. 1.2 Type of climatic version of this model UHL 3.1 according to GOST 15150-69 (P 3.2), that is, this model is designed to work in a temperate climate with an operating temperature range of -10 to +40 °...
- Page 3 4.1. The main elements of the engraver are shown in Fig. 1 1 – Collet clamping nut 5 – Charging cable 2 – Plastic nut 6 - Ventilation holes 3 – Shaft lock button 7 – Brush holder cover 4 – Speed switch 8 - Power button 4.2 The engraver with a set of accessories in a case is shown in Fig.
- Page 4 5.1 You must use the engraver only in accordance with the purpose indicated in the manual. 5.2 When operating it is necessary to comply with all the requirements of this manual, handle the engraver carefully, do not expose it to shocks, overloads, or dirt. 5.3 The use of a double-insulated commutator drive ensures maximum electrical safety when operating from a 230 V AC mains without the use of personal protective equipment and grounding devices.
-
Page 5: Operation
2) Install the necessary working attachment into the collet chuck. 3) Secure the bit in the collet by tightening the clamping nut tightly while holding the lock button securely. 6.3 To replace the collet, it is necessary to: completely unscrew the clamping nut, remove the collet, install the collet of the required size and fix it with the nut. -
Page 6: Service & Maintenance
5. Warranty service is performed by organizations authorized for this - authorized service centers, the list of which is contained on the support page of the website http://www.accesstyle.ru and is available by phone 8-800-250- 07-17. During the warranty period, the elimination of manufacturing defects is free of charge for the buyer upon presentation of the original completed warranty card and / or documents confirming the fact and date of purchase (cash receipt).