Advertisement
2769 & 2772
1
1
4770
NOTE: The deck and valve rough-in must be finished before
installing the trim kit.
Model 2769 & 2772
Unscrew the test cap (1) and discard.
Model 4770
Remove set screw (1). Remove and discard test cap (2).
1
2
Screw bases (1) with gaskets (2) over end valves (3). OPTION: Use
silicone under the gasket if deck is uneven. Install spout (4) on
adapter (5). Be sure spout is resting firmly on deck. Install set screw
(6) and tighten to secure spout (4). Models 2769 and 2772 proceed
to step 4. Model 4770 proceed to step 3.
5
46690
Rev. A
Advertisement
