Advertisement
1. VC10 CAMERA INSTRUCTION
1.0 INSTALLATION
Connect the camera to the chart plotter according to the drawing below.
Consult the chart plotter User Manual to activate the video camera.
The camera is designed for outdoor marine use. This means that the camera
can be mounted on the vessels that comes in direct spray or can be rained on
without any problem. However the camera is not designed to mounted under
water (submersed).
1.1 SPECIFICATIONS
Image Device
Number of Pixels
Signal Format
Sync System
Horizontal Resolution
Usable Illumination
S/N Ratio
VC10
Figure 1.0 - Installation
: 1/4" Interline CD
: PAL: (H) 500 x (V) 482
: PAL
: Internal Synchronization
: 330 TV Line
: 1 Lux (F:2.0)
: More than 48dB (AGC Off)
Page 5
Advertisement
