Table of Contents
Advertisement
¡ 2 mm twist drill
¡ Screwdriver
4.6 Installing the appliance
Preparing the appliance
To make it easier to slide in the
1.
appliance, turn in the appliance's
rear feet until the appliance is on
the runners.
Measure the built-in niche.
2.
Lay the power cord as well as the
3.
water inlet and water drain hose.
Installation and connection en
Slide the appliance in and, at the
4.
same time, pull through the power
cord, water inlet and water drain
hose.
Connect the water inlet hose.
5.
→ "Connecting the water inlet
hose", Page 20
Connect the water drain hose.
6.
→ "Water outlet connection types",
Page 20
Unscrew the rear appliance feet.
7.
15
Advertisement
Table of Contents
