Motorola HK250 Manual page 9

status light
quick red flash
Note: After 1 minute on a call, or 20 minutes of
inactivity, the light stops flashing to save battery power,
but the headset stays on.
Settings
Press and hold the Call button
on. Follow the voice prompts to change these settings:
• Reset to factory default
Note: This removes all pairing information stored in
your headset.
• Voice interface
• Caller ID
• Multipoint (two phone) connections
• WBS (wide-band audio for better sound)
EN
headset
in a low battery state
and turn the headset
Advanced 7