Table of Contents
Advertisement
4.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto
Adjust (VGA only), from this main function.
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
•
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
•
Aspect Control: Adjusts the aspect ratio to "Full", "4:3", "Overscan(Only
For HDMI)".
•
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
•
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
•
Motion Sync: Check to decrease motion blur and minimize ghosting part
when on-screen objects are fast moving. It can only be turned on at 75Hz
or above.
•
FreeSync: It can allow a FreeSync supported graphics source to
dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
•
Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
•
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
•
Auto Adjust.: Automatically adjust the image to its optimized position,
clock, and phase. (Only available for VGA input.)
3-6
Image
Sharpness
Trace Free
Aspect Control
VividPixel
ASCR
Motion Sync
FreeSync
Position
Focus
Auto Adjust
ASUS VZ22E
Standard Mode VGA 1920x1080@60Hz
Chapter 3: General Instruction
Advertisement
Table of Contents
