Sharp AQUOS 4T-80CJ1U Operation Manual page 34

>> On-Screen Display Menu
<<
Example
Initial Setup (Continue)
Individual setip
Parental Control
(Parental Control Setting)
Reactivating the temporary released V-CHIP BLOCK
You can reactivate the temporarily released V_CHIP BLOCK
as shown below.
Select "Status" setting from the Parental Control menu to
reactivate BLOCK.
Select "V_Chip" setting ("MPAA", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental Control to reactivate BLOCK.
(See pages 4-7 to 4-9)
Switch off the TV power. (When "Quick Start Mode" is
"OFF".)
NOTE
Performing any of the three above will activate the V-CHIP
BLOCK.
Status
Used to enable or disable the parental control function. This
function will not be selectable from the menu if you do not first
configure your secret number.
ENG 4-10
Quick Start Mode
When this function is activated, you can reduce the Monitor's
start-up time or even let the TV in standby mode start
displaying images and so on via the connected equipment on
the network.
NOTE
Setting "Quick Start Mode" to "On" consumes more power.