Download Print this page

Sealey PH400.V3 Instructions page 3

250kg / 400kg power hoist

Advertisement

6. MAINTENANCE
6.1.
The hoist should be thoroughly checked over at regular intervals to ensure that it is undamaged and is functioning correctly.
6.2.
Isolate from the power supply and inspect the following for any signs of damage, wear or looseness, as appropriate:
a) Lifting cable
b) Electrical cables/connections
c) Control switch
Rectify any faults that are found, before using the hoist again.
6.3.
Reconnect to power supply and check for correct operation of the control switch and the maximum lift cut-out switch - the hoist should
stop when the counterweight (fig.2.4) lifts the cut-out arm (fig.2.5).
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
d) Mounting brackets/bolts
e) Support structure
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PH250.V4, PH400.V3 Issue 4 (1) 03/03/23
REGISTER YOUR
PURCHASE HERE

Advertisement

loading

This manual is also suitable for:

Ph250.v4