Nokia TA-1012 DS Get Started

Get Started
Nokia 8
TA-1012/TA-1004 DS
1. Insert the SIM and memory
card
1. Open the SIM tray and memory card tray by
putting the provided tray opener into the hole next
to the tray.
2. Put the nano-SIM into the slot 1 located on the
tray with the contact area face down. If you have a
second SIM, put it into the slot 2, or, if you have a
memory card, put the card into the memory card
slot located in the SIM slot 2.
3. Slide the SIM and memory card trays back into
the slots.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
PKNB155008A
Main cameras
Loudspeaker
Microphone
EN 0.9
Audio connector
Fingerprint sensor/Home
Charger connector
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-C cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
USB-C USB micro-B
Microphone
Front camera
Microphone
SIM card/MicroSD card
Earpiece
Power/Lock key
3. Learn more about your new
Nokia phone
For a printable user guide, online user guide, and
troubleshooting help, go to www.nokia.com/
phones.
Volume keys