Summary of Contents for Costway ULTIMATE FORCE GT3535US
Page 1
USER’S MANUAL 20V CORDLESS POLE CHAIN SAW GT3535US THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 3
THANK YOU FOR BUYING THE PRODUCT. To ensure your safety and satisfaction, carefully read through this OWNER'S MANUAL before using the product. General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Page 4
2) Electrical safety 4) Power tool use and care a) Charger plug must match the correct outlet. Never modify the charger plug in any a) Do not force the power tool. Use the correct power tool for your application. The way.
Page 5
INSTRUCTIONS FOR SAFE HANDLING 7. Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance. 1. Make sure that the tool is only connected to the voltage marked on the name plate. 8.
DISPOSAL OF THE EXHAUSTED BATTERY ASSEMBLY Li-ion batteries must be recycled. WARNING! Take the battery to the shop from which it was purchased as soon as the post-charging Turn off the appliance and, before doing any servicing, remove the battery. battery life becomes too short for practical use.
2. Check the chain tension using one hand to lift the saw chain (1) against the weight of ADJUSTING THE TELESCOPIC TUBE (Fig. 8) the product. The correct chain tension is achieved when the saw chain can be lifted by The telescopic tube (10) can be infinitely adjusted using telescoping collar (11).
INSTALLING AND REMOVING BATTERY PACK (Fig. 10) CLEANING To install battery pack (15), lock the trigger switch by placing the forward/reverse WARNING! switch in the center position. Align the body with the groove in the battery pack and Do not use cleaning agents or solvents. You may otherwise irreparably damage the push in the direction of the arrow until the battery pack is secured on the tool.
Need help?
Do you have a question about the ULTIMATE FORCE GT3535US and is the answer not in the manual?
Questions and answers