en Installation and connection
container. Use the water outlet hose
to drain away excess condensation
directly into the waste water system.
Notes
¡ Operate this appliance using the
water outlet hose provided.
→ "Connecting the water drain
hose", Page 14
If you connect the water outlet
hose, you do not have to regularly
empty the condensation container.
→ "Emptying the condensation
container", Page 33
¡ You can order this optional
→ "Accessories", Page 29 from
our customer service.
Connecting the water drain hose
If you do not want to regularly empty
the appliance's condensation con-
tainer, connect the water outlet hose.
ATTENTION!
When operating the appliance
without the water drain hose being
connected properly, liquid may leak
out of the connecting piece.
Before operating the appliance,
▶
connect the water drain hose prop-
erly to the connecting piece.
Requirements
¡ The appliance and the accessory
have been unpacked.
→ "Unpacking the appliance",
Page 12
¡ The appliance is installed at the in-
stallation location.
→ "Requirements for the installa-
tion location", Page 13
14
Pull out the condensation hose
1.
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note: When removing the con-
densation hose, liquid may leak
out of the connecting piece.
Push the condensation hose into
2.
the holder.