Do you have a question about the GDTHT019 and is the answer not in the manual?
Questions and answers
Summary of Contents for Good Display GDTHT019
Page 1
Product Manual GDTHT019 Front View Tip: When installing and using the product, ePaper Display Please avoid covering the vents.
Page 2
Back View Tip: When installing and using the product, Sticking Position Please avoid covering the vents. Notice: First time installation and use, Please remove the battery insulation sheet. Insulating Sheet Accessories: wall stickers...
Product Installation Tip: The product can be installed and used in the following ways A: Placement: directly place the product on a table/bookshelf, etc. B: Sticking: Remove the release paper from the wall sticker and stick one side of the wall sticker inside the designated battery cover ring of the product.
Page 4
C: Hanging: Press one end of the hanging rope tightly from either end of the hanging rope hole; push in with tools such as fine needles for traction, pull out from another end. Reminder: The hanging rope needs separate purchase Attention: Do not forcefully pull the rope in case of damage to the buckle...
Product Use Display Temperature and Humidity Temperature Humidity...
Page 6
Precaution 1.Ventilation holes of the product should not be submerged in water; 2.After sticking on the wall, do not forcefully remove it to avoid damage to the product or wall surface; 3.This product is not suitable for use in environments below 0 ℃. Please stay away from harsh environments such as high temperature and humidity;...
Maintenance Replacing the battery Snap the battery cover out of the lock identification position on the battery cover, and insert the positive electrode of a CR2032 battery into the battery compartment. Press the battery cover into place according to the lock position. Note: CR2032 needs to be aligned with the positive spring Cleaning maintenance...
Page 9
Warranty Content The after-sales service of this product is strictly in accordance with the "Consumer Rights Protection Law of the People's Republic of China" and the "Product Quality Law of the People's Republic of China" to implement after-sales three guarantees service. The service content is as follows: Warranty period 1.Within 7 days from the day after you sign for the product, if there are any performance faults listed in the "Temperature and Humidity Meter Performance Fault Table", our after-sales service center will...
Page 10
Warranty content • Host and composition, 1-year warranty period • Attention: Batteries and wall stickers are random consumables of the product and have no warranty period. Non warranty regulations • Unauthorized repair, misuse, collision, negligence, abuse, liquid ingress, accidents • Alteration, incorrect use of non product accessories, or tearing or altering labels •...
Page 11
Performance Fault Table Product Name Performance Fault ePaper Surface damage caused by structural or material reasons Thermometer Screen cannot be displayed or data cannot be displayed DALIA Address: No.18, Zhonghua West Road, Dalian, 116033, China Telephone:+86-411- 84619565 www.good-display.com/blank7.html?productId=509 Reminder: The product, accessories, user interface, and other illustrations in the manual areschematic diagrams for reference only.
Need help?
Do you have a question about the GDTHT019 and is the answer not in the manual?
Questions and answers