Page 2
The information contained in this documentation is subject to change without notice. In no event will AVer Information Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.
Cart Diagram Front Work platform Handle Ventilation holes Door Lock 5” caster 5” Locking caster Ventilation holes Side LED panel Auxiliary outlets Mounting points for Access Point holder(Optional) Power cable wrap brackets Power switch Power inlet [Note] Auxiliary outlet and power inlet type may vary as they are country dependent.
Setup [Note] 1. It is recommended to use cable ties (optional) to secure and manage cables. 2. It is recommended to use 2 technicians for most efficient device cabling. Open the door on back side. Place the device power adapter brick to the dedicated adapter holder (white) Plug-in the device power plug to the power outlet.
Page 10
Turn to the front side and open the door Pull out each shelf until it is fully extended Put the device into the tray [Note] Remember to connect the power cord to each device. Cable Management (1) Adjust the position of each cable holder as desired. (2) Rotate the clip to the size that best fits the power adapter cable.
Page 11
Connect C30i cart power to begin charging Auxiliary outlet [Note] All auxiliary outlets can function concurrently while the devices are being charged...
III. Specifications Capacity All mobile devices up to 15” screen Device support 3.4(W) x 38(D) x 26(H) cm Slot Dimension (W x D x H) 1.34”(W) x 14.96”(D) x 10.24”(H) Auxiliary outlets LED status indicators Charging type Power receptacle AC IN: 100-120V ~ 50/60Hz, 12A 220-240V ~ 50/60Hz, 8A PWR Strip_30 ports in total...
AVer’s intelligent charging mechanism dynamically monitors each of the three charging zones to allocate electrical current to the zone or zones that need it most. While C30i can safely charge up to 30 tablets at one time, if Chromebooks or other devices that draw more power are being used, the intelligent charging mechanism will automatically adjust power to certain zones to avoid overloading a standard 15A fuse.