Herowear Apex 2 EXO Manual

WEARING THE
1
2
4
Ensure that the anchor is aligned with
5
the outside seam on your pants, then
attach the hook to your belt.
v3.0EN
Assemble the Apex 2 by sliding the top loop of the bands
through the metal carabiner on the clutch with the writing
on the bands facing outward. Lay the thigh sleeves with the
rubberized material and lettering facing down. Slide the
right band's carabiner through the top of the right thigh
sleeve loop. Then slide the left band's carabiner through
the top of the left thigh sleeve loop.
Put the shouldes straps on like a backpack. Then
hook the G-hook through the corresponding
loop on the left shoulder strap and tighen until
comfortable.
Before putting on the thigh sleeves, ensure your right thigh
sleeve is on the right and the left thigh sleeve is on the left. Put
on the right thigh sleeve by grabbing the carabiner and pulling
down, ensuring the band is centered on the back of your leg
(below your buttock). Then buckle the thigh sleeve and adjust it
to your comfort level.
Tighten the anchor strap by pulling
6
out and down on the loose end of the
webbing until flat against the thigh. Do
not over tighten.
HeroWearExo.com
HANG ME WITH
YOUR APEX.
1a
3
1b
Tighten the shoulder straps
until the switch is on the
front of your shoulder.
7 Fold loose webbing and secure in
webbing keeper.