Advertisement
Quick Links
1
Flowline Master with Edge V1 Stabilization Arm
(FLN-MSTR-EGV1)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Support Bar
Camera Hook
Edge V1
Stabilization
Arm
Height Riser
Side Support
Adjustment
Flycam
2mm Allen Key
2 x Washers
Flowline
Balance Adjustment
2 x Velcro
Master
Knob
2.5mm Allen Key
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Related Manuals for Flycam Master
Summary of Contents for Flycam Master
- Page 1 Flowline Master with Edge V1 Stabilization Arm (FLN-MSTR-EGV1) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Flowline Master with Edge Setup • Loosen the screw of the Camera Hook attached to the Flowline Support Arm using the Allen key. • Similarly, remove the second screw. • Now, remove the Hook from the Flowline Support Arm. •...
- Page 3 • Dissemble the Camera Hook and the Support Rod from the Vest. • To detach the extension from the Support Rod of the Vest, remove its screw using a screwdriver. • Detach the extension from the Support Rod and align the cord with the height riser, as shown in the image.
- Page 4 Properly attach the Edge to the flowline vest. Feature: It attaches to your Flowline Body Worn Systems like Basic flowline hanger, master flowline hanger, and N series hanger (300N, 400N & 500N) to provide Smooth Floating Shots with utmost comfort. •...
- Page 5 • After inserting the cord in the Cup, pull it outwards and insert it in the Cord Lock. • After inserting it into the Cup, tie it properly with the Cord Lock. • Attach the Camera Hook to the Cup. •...
- Page 6 Low/ High Angle Shots Adjust Camera Setup Position...
- Page 7 YOUR FLYCAM FLOWLINE MASTER WITH EDGE V1 STABILIZATION ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.