Samsung S32BG75 N Series User Manual page 10

S32BG85*N
x 4
1
Place the stand neck on the monitor as Fasten the screws at the top of the
shown in the figure. stand neck.
6
Rotate the COVER-REAR TOP clockwise.
2 3
Insert the stand base into the stand
neck in the direction as shown in the
figure.
7
Stand up the monitor as shown in the
figure.
4
Disassemble the COVER-REAR TOP. Assemble the COVER-REAR TOP to the
stand neck as shown in the figure.
8
After installing the stand, place the Caution
product upright.
Do not arbitrarily remove the panel
film. If not observed, the warranty
service may be restricted.
5
10