Page 4
RF exposure requirements and void user’s authority to operate the device. 1. Introduction Thank you for purchasing Speco Technologies’ 128 Frequency-Selectable UHF Wireless Microphone System. This wireless microphone system operates in UHF band frequency with synthesizer controlled. The system with 128 selectable frequencies via Phase Locked Loop (PLL) circuitry makes it easy to choose non-interfered channels.
5.1 128 Frequency-Selectable UHF Wireless Receivers The MWR-100UHF and MWR-200UHF are wireless receivers both used with Speco Technologies’ 128 selectable UHF frequencies transmitters -- the MWHH-UHF Handheld or MWLP-UHF Lapel UHF transmitters (purchased separately). MWR-100UHF 128 Frequency-Selectable Single Channel UHF Receiver...
Volume Level Control: This control increases the receiver output level to match the input sensitivity of an audio mixer or an amplifier. . DC OUT: Connect the supplied cable to the receiver and the microphone, it takes around 10 hours to charge. Only nickel-MH batteries my be recharged.
Page 7
WARNING: ONLY NICKEL-NH BATTERIES MAY BE USED WHEN RECHARGING (Sold Separately) Connect the supplied DC1.5 cable to the receiver and the microphone, and it takes around 10 hours to charge. The LED of transmitter is flashing all the time when charging.
While cover open, use up and down channel buttons to select a frequency. Close battery cover. Plug the mini XLR connector of the microphone cable into the audio input connector on the bodypack transmitter. Switch the transmitter and hi-fi appliances (amplifier, tape deck etc.) power on.
DC-plug cable connection to DC out on the receiver. It takes up to 10 hours for charging. MWR-200UHF Professional UHF Dual Channel, Diversity PLL Receiver (For use with Speco Technologies’ MWHH-UHF & MWLP-UHF) Features FCC Compliant 128 Frequency-selectable for interference- free usage...
Page 10
2. Mini XLR Connector: The included electret lapel microphone is inserted into the connector on transmitter. 3. Programmable Display: Displays channel number and battery power level 4. Mic/Line Selector: The switch sets the audio input either to microphone level or line level. 5. Antenna: Permanently connected, helical antenna.
Need help?
Do you have a question about the MWHH-UHF and is the answer not in the manual?
Questions and answers