Advertisement
Quick Links
Advertisement
Summary of Contents for Pebble S110BT
- Page 1 Pebble S110BT Wireless Charger Quick Start Guide v1.1...
-
Page 2: Included In The Box
Replace your Galaxy S3 battery cover with new one in the box. Bluetooth paring Bluetooth Pairing 1. Plug in adaptor to wall power with caution. And Plug in micro USB to Wireless Charger S110BT. 2. Turn Galaxy S3 Bluetooth on and touch [Scan] to search Bluetooth devices 3. Select “S110-WiPAT”... -
Page 3: How To Charge
4. Put the smartphone on the S110. Note : Please put your phone in the right position as below. 5. You will see the pop-up “Wireless charging is detected” if the smartphone detect wireless charging. Also the smartphone APP will display the position of the S110BT(Tx). - Page 4 Move smartphone to upper right direction! 6. Move the smartphone according to the guide image 7. The APP will play sound and display animation if it matches the center or the best position for charging. 8 The Screen will be off in accordance with the setting of Screen timeout in Display menu.
- Page 5 9. The RED LED is ON if the position is matched, otherwise it is flashing. Below is the operation table of S110BTLED. Charging Status Position match Red LED Green LED Flash-6sec Flash-6sec No Charging (Fade in/out) (Fade in/out) Flash-1sec Charging Full Charge...
- Page 6 1. Regulatory Notices FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.