Installation; Check Before Installation; Installation Direction; Ceiling-Type Installation - LG BU70QGA-GL Owner's Manual

Hide thumbs Also See for BU70QGA-GL:
Table of Contents

Advertisement

INSTALLATION

Check before Installation

We will not be held responsible for the product damage caused by not following the
guide.
CAUTION
Do not overlap the projectors with each other.
NOTE
It is recommended to set the Focus, Zoom, and Lens Shift at least 20 minutes
after the projection starts, as the image may not be stable immediately after the
projector is turned on.

Installation Direction

You can install the projector regardless of the angle. There are no vertical or
horizontal limits related to the installation of the projector.
To install the projector in an inclined position, you may need some exclusive
installation mounter.
Prepare a mounter by consulting an expert.

Ceiling-Type Installation

WARNING
When installing the product on the ceiling, observe the following precautions
to prevent the projector from falling:
— It is recommended to install the product through a professional installation
services provider. (If installing on the ceiling, modify the projector's PJT Mode
settings)
— Do not use adhesive, lubricant, oil, etc. when using the mounting equipment.
— Do not tighten the screws with an excessive force since the projector may fall
due to breakage of the screw connection part.
— Standard screw: M4 x 8 mm, M6 x 10 mm, 1/4-20 UNC x 5 mm
(Applicable screw types may vary depending on the model.)
— Recommended torque: 5-8 kgf.cm
A failure to follow the precautions may result in injury or death and product
damage due to the fall of the product.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probeam bu70qgaBu70qga.aeu

Table of Contents