Page 1
KHE 5-40 MHE 5 MH 5 de Originalbetriebsanleitung 4 Alkuperäiset ohjeet 40 en Original instructions 8 no Original bruksanvisning 44 Notice originale 12 da Original brugsanvisning 48 Oorspronkelijke gebruiksaanwijzing 17 Instrukcja oryginalna 52 Istruzioni originali 21 Πρωτότυπο οδηγιώνχρήσης 57 es Manual original 26 hu Eredeti használati utasítás 62...
2. Specified Conditions of Use Further Safety instructions Pull the plug out of the socket before making any The KHE 5-40 is designed for hammer drilling and adjustments, changing tools, maintaining or chiselling in concrete, bricks, stone and similar cleaning.
10 Button for continuous operation (KHE...: only in chisel operating mode) A damaged or cracked additional handle must be 11 Metabo VibraTech (MVT): integrated damping replaced. Never operate a machine with a defective system additional handle.
To switch off, press the (10) button once again. authorised service centre. In continuous operation, the machine 10. Accessories continues running if it is forced out of your hands. Therefore, always hold the machine with Use only genuine Metabo accessories.
A defective mains cable must only be replaced with Vibration total value (vector sum of three directions) a special, original mains cable from metabo, which determined in accordance with EN 62841: is available only from the Metabo service. = Vibration emission value (hammer drilling...