Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Blue Thumb Elite
- Page 1 View our Installation Video Online Elite Waterfall Installation Manual...
- Page 2 (1) Landscape (1) Media Bag (2) Filter Mat (1) Waterfall Box (1) Spillway Self-Tapping Black Silicone Threaded Male Plug Screws Adapter STEP 1 Choose Waterfall Location The waterfall should be positioned so that the water flowing from it enters the pond opposite the skimmer to ensure proper water circulation.
- Page 3 STEP 4 Hook-Up Flexible PVC Pipe The 14” & 22” Elite Waterfalls are plumbed to accept 2” Flexible PVC Pipe; the 30” Elite Waterfall is plumbed to accept either 2” or 3” Flexible PVC Pipe; and the 40” Elite Waterfall is plumbed to accept 3”...
- Page 4 STEP 5 Attach Liner to Waterfall Bring the liner up to the face of the waterfall box and check the positioning of the liner against the waterfall box. Use the liner clips (included) to temporarily hold the liner to the box.
- Page 5 STEP 6 Install Filter Media Position the filter mat(s) horizontally in the bottom of the waterfall box. The Elite Waterfalls include two green Matala Mats. Fill the media bag(s) with biological media (not included) and position on top of the filter mats.
- Page 6 This will give you a much more dramatic waterfall display! SUGGESTED PRODUCTS Blue Thumb recommends the following products that are compatible with Blue Thumb Biological Waterfall Filters: • Bact-Twist Media • PondBuild ‘n Foam Waterfall Foam...
- Page 7 CREATIVE WAYS TO COVER YOUR WATERFALL BOX...
- Page 8 If you are using tap water that contains chlorine and you have fish then be sure to add Blue Thumb’s Purify to the pond as you add water. Add water until the water level reaches to within 3/4” - 1” below the opening of the skimmer box.
Need help?
Do you have a question about the Elite and is the answer not in the manual?
Questions and answers