Table of Contents
Advertisement
Water container symbol comes on
the display and you must empty the
water container.
To empty the water container:
1. Pull the water container out keeping
it in a horizontal position.
2. Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in
and place the water container back
into position.
4. To continue the programme press
the Start/Pause button.
12.3 Cleaning the condenser
Heat exchanger flashes
If the symbol
on the display, inspect the condenser
and its compartment. If it is dirty, clean it.
Do the check not less than once a 6
months.
WARNING!
Do not touch the metal
surface with bare hands.
Risk of injury. Wear
protective gloves. Clean
carefully to avoid damaging
the metal surface.
To inspect:
1. Open the door. Pull the filter up.
2. Open the condenser cover.
3. Turn the lever to unlock the
condenser lid.
4. Lower the condenser lid.
5. If necessary, remove the fluff from
the condenser and its compartment.
You can use a vacuum cleaner with a
brush attachment.
ENGLISH
31
Advertisement
Table of Contents
