Initial Cleaning - Samsung NZ30K6330R Series User Manual

Hide thumbs Also See for NZ30K6330R Series:
Table of Contents

Advertisement

Before you start
Location of the surface elements and controls
01
04
06
01 Left Rear
02 Center
(7", 1500 W)
(6"/9", 3300 W)
04 Left Front
05 Right Front
(7", 1500 W)
(5"/8", 2000 W)
07 Hot surface indicator
08 Smart Connect button
16 English
03
02
05
08
07
03 Right Rear
(6", 1200 W)
06 Control Knob
Knob lighting
Hot surface indicator
Comes on when the unit is turned on or hot to the touch.
Stays on even after the unit is turned off.
The hot surface indicator turns off only when the cooking zone has cooled
down to approximately 150 °F.
Cooking areas
The cooking areas on your cooktop are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
When a control is turned on, you can see a glow through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware".

Initial cleaning

Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass
cleaner.
WARNING
Do not use caustic or abrasive cleaners. You can damage the surface.
Press and turn the knob to a desired setting.
The indicator turns on and confirms the
selected setting.

Advertisement

Table of Contents
loading

Table of Contents