If any of these items are not present, please contact the Bush Company immediately by email and we will send out the missing component. Please provide the serial number of your DX27 Clamshell Tent when communicating with The Bush Company, it is stamped to the gusset at the front section of the roof of the tent.
1.2 What You Need for The Install The Bush Company or one of our stockists can assemble and install your tent, but if you choose to install the rooftop tent yourself, please make sure that you have done the due-diligence on your intended install to ensure that it does not create any safety issues and ensure that you follow standard safety precautions when undertaking the install.
SCREW THE TOP PART OF THE GAS STRUT INTO THE NUT, HELD IN PLACE BY THE BLACK BUTTON HEAD SCREW. ENSURE TO PROPERLY FASTEN THE BALL JOINT. • The Bush Company www.thebushcompany.com DX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:49:00 AM...
Page 6
REPEAT THE GAS STRUT FASTENING PROCESS FOR THE BOTTOM SHELL. STEP 5: • ENSURE TO SECURE ALL 4 BALL JOINTS ON THE GAS STRUTS VIA THE SPRING LOCKING PIN. The Bush Company www.thebushcompany.com DX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:49:00 AM...
Note: When running a permanent connection to this point a 20amp in-line fuse must be used and the correct thickness electrical cable must be used to safely handle 25amp over the distance as needed. The Bush Company www.thebushcompany.com DX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:49:00 AM...
The Bush Company do not recommend mounting the tent without full support running horizontally across the full width of the tent. If this is not done it will void the warranty on your tent.
(e.g.: Lanotec Type A grease, Nickel Anti-Seize Grease). We also recommend NOT to use power tools when tightening the bolts to reduce the risk of seizing an over tightening. The Bush Company www.thebushcompany.com DX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:49:00 AM...
FITMENT BRACKETS ON THE INSIDE OF THE TENT FOOT EXTRUSIONS 4.2.3 Option 3 – Fitment Bracket Inside Extrusion MOUNTING BOLTS INSERT INTO CENTRAL CHANNEL OF THE TENT FOOT EXTRUSIONS The Bush Company www.thebushcompany.com DX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:49:00 AM...
Your mattress absorbs moisture through body sweat. When travelling for extended periods it is a good idea to move your bedding back from the mattress during the day to allow the mattress to breathe. The Bush Company www.thebushcompany.com DX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:49:00 AM...
Bush Company outlet that you purchased your tent from to initiate the warranty process. If you are in Australia, please go to The Bush Company Australia website and visit the My Account section to raise a warranty support ticket. Full details of how to do this can be found here https://www.thebushcompany.com.au/support-warranty/...