Summary of Contents for littoak SE04
- Page 1 Quick Start (SE04) If you have any questions after reading all of this instruction, pls feel free to contact service@littoak.com...
-
Page 2: Box Contents
If you have any questions after reading all of this instruction, pls feel free to contact service@littoak.com Sound Bar Remote Control Quick Start Mount Screw Digital Optical cable 3.5mm to 3.5mm Power Adapter audio cable If missing any accessories, pls contact service@littoak.com LED Indicators Standby Bluetooth LED Indicators Optical Coaxial... - Page 3 About SE04 Front Back HD-ARC COAX OPTICAL Remote Pls remember to remove the plastic sheet to power on the remote.
- Page 4 Front Press to turn on/change the audio source; Press and hold it to turn off. Press to previous/next track; Press and hold it to decrease/increase the loudness of audio. Select the source input mode(Bluetooth ->Optical -> ARC -> Coaxial -> AUX -> USB); Press and hold to reset treble and bass to factory settings.
-
Page 5: Connecting With A Tv
Select Optical/Coaxial mode on Soundbar. (LED: Set the TV’ s audio output to “PCM”. Method : Connecting using an High speed ARC cable. Select ARC mode on SE04. Select ARC mode on SE04. (LED: Set the TV’ s audio output to “PCM”. -
Page 6: Connecting A Bluetooth Device
Sound Bar, the LED indicator blinks blue. b. Turn on Bluetooth on the Bluetooth device. c. Select “SE04” and connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly. d. Play music files from the device, connected via Bluetooth, through the Sound Bar. -
Page 7: Installing The Wall Mount
Installing the Wall Mount 1. Use a tool to drill 2 holes in the wall, make sure the size as shown in the picture. 320mm 3 inches or more screw hole 2. Put the plastic into the plastic hole and screw in the screw, screw as shown in the picture. -
Page 8: Troubleshooting
Setting “PCM” on your TV When all cables are connected properly, and LED indicator lights properly, if there is no sound from tv or Sound Bar, please setting your tv as below: 1. Press "Menu" on the TV’ s remote control. 2. - Page 9 No sound or crackling noise Check if all cables are connected properly. Press Mute on the remote to ensure the Sound Bar is not muted. Press Volume+ on the remote or the right side of your Sound Bar. Make sure you have selected the right input source on your remote, and the LED is lighting accordingly.
- Page 10 Thanks for your reading! Welcome to any questions or suggestions~ Our after-sales service is always online service@littoak.com...