Table of Contents
Advertisement
Quick Links
I N S T R U CT I O N M A N UA L
ME Series
Mist Eliminator
Models: ME125, ME250, ME500, ME1100, ME1500,
ME2100, ME2400, ME3000
F O R M N O . : 3 1 4 8 6 7 1
R E V I S I O N : 1 2 / 2 0 1 9
R E A D A N D U N D E R S TA N D T H I S M A N UA L P R I O R TO O P E R AT I N G O R S E R V I C I N G T H I S P R O D U CT.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SPXFLOW ME Series
Summary of Contents for SPXFLOW ME Series
- Page 1 I N S T R U CT I O N M A N UA L ME Series Mist Eliminator Models: ME125, ME250, ME500, ME1100, ME1500, ME2100, ME2400, ME3000 F O R M N O . : 3 1 4 8 6 7 1 R E V I S I O N : 1 2 / 2 0 1 9 R E A D A N D U N D E R S TA N D T H I S M A N UA L P R I O R TO O P E R AT I N G O R S E R V I C I N G T H I S P R O D U CT.
-
Page 2: Table Of Contents
CONTENTS GENERAL SAFETY INFORMATION ....... RECEIVING INSTRUCTIONS ......... DESCRIPTION ............1.0 INSTALLATION ..........2.0 OPERATION ............3.0 MAINTENANCE ..........DIMENSIONS AND WEIGHTS ........ WARRANTY ............GENERAL SAFETY INFORMATION DESCRIPTION Pressurized devices The Mist Eliminator is a coalescing type oil removal filter designed to remove oil and water aerosols from a compressed air system. -
Page 3: Installation
INSTALLATION A typical installation will also include: 1.1 System cleaning Manual or Automatic Drains The compressed air system should be purged prior to the installation of the Mist Eliminator. Differential Pressure Gauge • Solid particles should be removed from upstream lines in order to ... - Page 4 1.6 Drain provisions 1.8 Operating limitations The bottom of the pressure vessel is provided with a drain plug for 1. Maximum Working Pressure: shipping purposes. Provision for manual or automatic draining is Standard ASME Coded Units 150 psig (10.3 bar) necessary for proper operation.
-
Page 5: Operation
OPERATION MAINTENANCE 2.1 After installation slowly pressurize Mist Eliminator and inspect for 3.1 When to replace filter cartridge leaks. Operation is continuous and automatic. A. Initial (dry) pressure drop: 1 psi (0.07 bar) nominal. 2.2 Periodic checks are recommended to insure continuous separation B. -
Page 6: Dimensions And Weights
DIMENSIONS AND WEIGHTS... -
Page 7: Warranty
Mist Eliminator Warranty and Conditions of Sale Mist Eliminator Coalescing Filter Cartridge 5 Year Guarantee Statement: Seller guarantees that the coalescing filter cartridge shall not require replacement for five (5) years after shipment by Seller. This guarantee is based on the filter as delivered and is contingent upon the following: a) the filter is installed and operated as specified in the Installation and Operating Manual supplied with the filter and b) operation of the filter is within the filter specification limits. - Page 8 ME SERIES Mist Eliminator Models: ME125, ME250, ME500, ME1100, ME1500, ME2100, ME2400, ME3000 SPX FLOW, INC. 4647 S.W. 40th Avenue Ocala, Florida 34474-5788 U.S.A. P: (724) 745-1555 E: ft.dehydration.order.entry@spxflow.com www.spxflow.com/deltech Improvements and research are continuous at SPX FLOW, Inc. Specifications may change without notice.
Need help?
Do you have a question about the ME Series and is the answer not in the manual?
Questions and answers