Preparation - SOYO Dymond DYLT032A Operating Instructions Manual

Soyo dymond dylt032a: operating instruction
Hide thumbs Also See for Dymond DYLT032A:
Table of Contents

Advertisement

Preparation

Distance recommendations:
Avoid improper installation and never position the unit where good ventilation is impossible. When
installing this TV, distance recommendations must be maintained between the set and the wall, as well
as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown
for safe operation.
Cleaning the screen:
The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven colors,
discoloration, scratches, and other problems that cannot be repaired may occur. Pay attention to the
following when handling the screen.
Do not use glue or adhesive tape on the screen.
h
h
Do not write on the screen.
h
Do not allow the screen to come in contact with any hard objects.
Do not allow condensation to form on the screen.
h
Do not use alcohol, thinner, benzene or other solvents on the screen.
h
Do not rub the screen hard.
h
CAUTION:
Operate only from the power source specified (AC 120V, 60 Hz) on the unit.
h
Avoid damaging the AC plug and cord
h
When you are not using this unit for a long period of time, it is recommended that you disconnect the power
h
cord from the main outlet.
POWER CORD CONNECTION:
Connect the power cord, after completing all other connections.
1. Connect the power cord to this device.
2. Connect the power cord to the power outlet. (The type of plug is different from this drawing for some
countries.)
7

Advertisement

Table of Contents
loading

Table of Contents