Output code format .................. 19 RS232 interface setting ............... 19 RS232 Transmission Rate Setting ............19 Data bit, parity bit, stop bit settings ............20 GS Control Character Substitution ..........22 Scan Mode Setting ............... 23 iMozen SC511 User Manual...
Page 3
Interleaved 2 of 5 (ITF25) parity bit ............36 Interleaved 2 of 5 (ITF25) length selection ..........37 Interleaved 2 of 5 length limit ..............39 Industrial 2 of 5 ................39 Turn on/off barcode ................. 39 iMozen SC511 User Manual...
Page 4
EAN13 to ISSN ................48 GS1 DataBar (RSS14) ..............49 GS1 DataBar Limited ..............49 GS1 DataBar Expanded ............... 49 PDF417 ..................50 Micro PDF417 ................50 QR Code ..................50 Micro QR ..................50 Data Matrix ................... 51 iMozen SC511 User Manual...
Page 5
Some function setting descriptions and examples....59 Customized start/end code setting example ......... 59 Barcode length limit setting example ............. 60 Example of sending speed settings for the USB keyboard ....61 Warning Beeps ..................61 iMozen SC511 User Manual...
It supports a wide range of barcode types and features a rugged design that is plug-and-play for efficiency at your fingertips. The SC511 is not only an essential part of the workplace, but also a reliable assistant. The User Manual provides information on how to use the device.
○ Scan Key the scanning light at the center of the barcode, and the scan will be started automatically. Front View Table 2 - Product Features and Functions of the SC511 from the Front View Product Function Features Scan the Aim at the barcode for scanning from the front window.
Group Inc. Rear View Table 3 - Product Features and Functions of the SC511 from the Rear View Product Function Features Red light when power is connected. When decoding is successful, a beep will sound and a blue light will illuminate once.
If the barcode cannot be read even when the scanner is enabled to read the barcode of the specific type, please provide the original barcode to the Customer Support Representative in the form of photocopy or scanned image. iMozen SC511 User Manual...
Scan code function off Version number Scan the barcode below to display the scanner firmware version number. Version number Product default settings Scan the barcode below to restore the product to the factory default settings. Restore to factory settings iMozen SC511 User Manual...
The scanner supports USB-HID interface, USB-COM interface and RS232 interface. USB HID interface Scan the barcode below to set the SC511 to the USB-HID interface. USB-HID interface (default) RS232 interface Scan the barcode below to set the SC511 as an RS232 interface.
Barcode content with confirmation input (Enter) line character handling (USB-HID) Only 0A (Line feed LF) Only 0D (Confirmation input CR) line feed (default) Line feed for both 0A (line feed LR) and 0D (input confirmation CR) iMozen SC511 User Manual...
PC with low performance, it is recommended to select a low speed to ensure accurate transfer. Send speed low (default) Send speed medium Send speed high Customized send speed (2ms~50ms) Case Output Control Normal output (default) Case reversal iMozen SC511 User Manual...
Group Inc. All uppercase All lowercase Select a keyboard language English (United States) (By default) French (France) Italian (Italy) Italian 142 (Italy) German (Germany) iMozen SC511 User Manual...
Page 15
Group Inc. Spanish (Spain) Spanish (Latin America) Finnish Japanese Russian (MS) Russian (typewriter) Arabic (101) iMozen SC511 User Manual...
Page 16
Group Inc. Irish Polish (214) Polish (Programmers) Dutch (Netherlands) Czech (QWERTZ) Portuguese (Portugal) Portuguese (Brazil) Swedish (Sweden) iMozen SC511 User Manual...
All characters between 0x20 and 0xFF are output using the virtual keyboard All characters between 0x00 and 0x1F are output according to the control character definition (see Appendix) Mode 3. All characters between 0x00 and 0xFF are output using the virtual keyboard iMozen SC511 User Manual...
Group Inc. Virtual keyboard off (default) Virtual keyboard on (mode 1) Virtual keyboard on (mode 2) Virtual keyboard on (mode 3) Host operating system selection in virtual keyboard mode WINDOWS (default) MAC OS LINUX iMozen SC511 User Manual...
When the output encoding format is set to UNICODE, the output method under the USB-HID interface is forced to virtual keyboard output. English/Latin-1 encoding (default) UNICODE encoding (Word) RS232 interface setting RS232 Transmission Rate Setting Transfer rate 4800 Transfer rate 9600 (default) iMozen SC511 User Manual...
Group Inc. Transfer rate 19200 Transfer rate 38400 Transfer rate 57600 Transfer rate 115200 Data bit, parity bit, stop bit settings 7-bit data, 1-bit stop, no parity check 7-bit data, 1-bit stop, even parity check iMozen SC511 User Manual...
GS Control Character Substitution No Substitution Output character "Ç ", must scan "Virtual Keyboard Open" on page 20 first, see pages 58 and 59 for settings Replace with Ç Replace with | Replace with ^] Replace with ] iMozen SC511 User Manual...
The scanner will automatically sense the barcode in front of the lens and decode it without the need to press the scan button. Auto-sensing mode on Same barcode delay time If the set time is not exceeded, the same barcode will only be decoded once. iMozen SC511 User Manual...
750ms interval (default) 1s interval 2s interval Screen reading mode When this mode is switched on, the SC511 will be able to read the barcode on the screen of your phone or PC. Screen read mode off (default) Screen read mode on...
Group Inc. Center mode When Center mode is on, the SC511 only decodes barcodes that are aligned to the Center area of the front window of the scanner. Center Mode Off (default) Center mode on LED indicator setting Decode success LED off...
Group Inc. Volume high (default) Activation tone Start tone off Start tone on (default) Successful decoding tone Successful decoding tone off Successful decoding tone on (default) Successful decoding tone 1 (default) iMozen SC511 User Manual...
The scanner emits four consecutive error warning tones when data transmission fails. A single error warning tone will occur when a barcode is scanned that cannot be recognized. Error warning tone low (default) Error warning tone medium iMozen SC511 User Manual...
Group Inc. Error warning tone high Start/end code setting Start code No start code (default) Start code set to STX End code No end code used End code set to Enter End code set to Line Feed iMozen SC511 User Manual...
Turn on custom start code output Turn off custom start code output (default) Clear all custom start codes Custom Start Code *After scanning, please follow the barcode type ID table and data and edit barcode settings in the appendix iMozen SC511 User Manual...
Clear all custom end codes Custom end codes *After scanning, please follow the barcode type ID table and data and edit barcode settings in the appendix Inverted barcode settings Only for 1D barcodes/DataMatrix/Aztec Normal barcode only iMozen SC511 User Manual...
Page 31
Group Inc. Inverted barcode only Both normal and inverted barcodes can be solved iMozen SC511 User Manual...
Turn on support for all barcode types (default) Turn off support for all barcode types Turn on/off support for 1D barcodes Turn on support for 1D barcodes Turn off support for 1D barcodes iMozen SC511 User Manual...
Turn on support for 2D barcodes Turn off support for 2D barcodes Codabar Turn on/off barcode Turn on support for Codabar Turn off support for Codabar Codabar start/end codes Do not send Codabar start/end codes (default) iMozen SC511 User Manual...
Send Codabar start/end codes Codabar length limit Codabar minimum length limit (0~50 bits) Codabar maximum length limit (0~50 bits) Code 39 Turn on/off barcode Turn on support for Code 39 Turn off support for Code 39 iMozen SC511 User Manual...
Code 39 parity on does not send parity bits Code 39 parity on sends parity bits Code 39 Full ASCII Full ASCII on Full ASCII off (default) Code 39 length limit Code 39 Minimum length limit (0~50 bits) iMozen SC511 User Manual...
Turn on support for Code 32 Turn off support for Code 32 Interleaved 2 of 5 (ITF25) Turn on/off barcode Turn on support for ITF25 Turn off support for ITF25 Interleaved 2 of 5 (ITF25) parity bit iMozen SC511 User Manual...
ITF25 parity off (default) ITF25 parity on does not send parity bits ITF25 parity on sends parity bits Interleaved 2 of 5 (ITF25) length selection ITF25 any length (4-24 bits) (default) ITF25 6 bit length ITF25 8 bit length iMozen SC511 User Manual...
Page 38
Group Inc. ITF25 10 bit length ITF25 12 bit length ITF25 14 bit length ITF25 16 bit length ITF25 18 bit length ITF25 20 bit length iMozen SC511 User Manual...
Interleaved 2 of 5 length limit Interleaved 2 of 5 minimum length limit (0~50 bits) Interleaved 2 of 5 maximum length limit (0~50 bits) Industrial 2 of 5 Turn on/off barcode Turn on support for Industrial 2 of 5 iMozen SC511 User Manual...
Industrial 2 of 5 minimum length limit (0~50 bits) Industrial 2 of 5 maximum length limit (0~50 bits) Matrix 2 of 5 (25 code matrix) (4-24 bits) Turn on/off barcode Matrix 2 of 5 on Matrix 2 of 5 off iMozen SC511 User Manual...
Matrix 2 of 5 maximum length limit (0~50 bits) Code 93 Turn on/off barcode Turn on support for Code 93 Turn off support for Code 93 Code 93 length limit setting Code 93 minimum length limit (0~50 bits) iMozen SC511 User Manual...
Code 11 Turn on/off barcode Turn on support for Code 11 Turn off support for Code 11 (default) Code 11 parity bit output Code 11 parity bit output on Code 11 parity bit output off (default) iMozen SC511 User Manual...
Turn off support for Code 128 GS1-128 Turn on support for GS1-128 Turn off support for GS1-128 128 code length limit setting Code 128 minimum length limit (0~50 bits) Code 128 maximum length limit (0~50 bits) iMozen SC511 User Manual...
Group Inc. UPC-A Turn on/off barcode Turn on UPC-A support Turn off UPC-A support UPC-A parity bit Send UPC-A parity bits (default) Do not send UPC-A parity bits UPC-A to EAN-13 UPC-A to EAN-13 on iMozen SC511 User Manual...
UPC-A to EAN-13 off (default) UPC-E Turn on/off barcode Turn on support for UPC-E Turn on support for UPC-E UPC-E parity bit Send UPC-E parity bits (default) Do not send UPC-E parity bits UPC-E extended to UPC-A iMozen SC511 User Manual...
UPC-E extended to UPC-A on UPC-E extended to UPC-A off (default) EAN/JAN-8 Turn on/off barcode Turn on support for EAN/JAN-8 Turn off support for EAN/JAN-8 EAN/JAN-13 Turn on/off barcode Turn on support for EAN/JAN-13 Turn off support for EAN/JAN-13 iMozen SC511 User Manual...
UPC/EAN/JAN add-on code Ignore UPC/EAN/JAN add-on codes (default) Decode UPC/EAN/JAN add-on codes Self-adjusted UPC/EAN/JAN add-on codes EAN13 to ISBN Turn on EAN13 to ISBN Turn off EAN13 to ISBN (default) EAN13 to ISSN Turn on EAN13 to ISSN iMozen SC511 User Manual...
Turn off support for GS1 DataBar GS1 DataBar Limited Turn on support for GS1 DataBar Limited Turn off support for GS1 DataBar Limited GS1 DataBar Expanded Turn on support for GS1 DataBar Expanded Turn off support for GS1 DataBar Expanded iMozen SC511 User Manual...
Turn on support for PDF417 Turn off support for PDF417 Micro PDF417 Turn on support for Micro PDF417 Turn off support for Micro PDF417 QR Code Turn on support for QR Turn off support for QR Micro QR iMozen SC511 User Manual...
Turn on support for Micro QR Turn off support for Micro QR Data Matrix Turn on support for Data Matrix Turn off support for Data Matrix Aztec Code Turn on support for Aztec Turn off support for Aztec iMozen SC511 User Manual...
EAN-13 EAN-8 GS1 DataBar GS1-128 (EAN-128) 2 of 5 Interleaved 2 of 5 Matrix 2 of 5 Industry 2 of 5 UPC-A UPC-E ISBN ISSN Aztec Code DataMatrix PDF417 Micro PDF417 QR Code Micro QR Code iMozen SC511 User Manual...
Group Inc. <SPACE> “ & ‘ < > Control character set (USB-HID) Corresponding key value 16-entry Corresponding key value (control Decimal (control character escape system character escape off) Reserved Ctrl+@ iMozen SC511 User Manual...
Set the barcode start/end codes by scanning up to 10 characters per start or end code. (To ensure that custom start/end codes can be output, please set the custom start/end code output option of the scanner to on. iMozen SC511 User Manual...
Set the Code 128 barcode length to 4-12 bits 1. Scan the Code 128 minimum length limit, then scan the appendix data and edit barcode for 4, and save it. iMozen SC511 User Manual...
1. Scan the custom send speed, then scan the appendix data and edit barcode for 5, 0. 2. Save to complete the setup. Warning Beeps When there is an abnormality in the data transmission, the scanner will sound four consecutive beeps. Please check that the connection is OK. iMozen SC511 User Manual...