Advertisement
Quick Links
ELECTRIC HEIGHT ADJUSTABLE TABLE
ConSet® - TYPE 501-11 1X138H (CORNER)
DIRECTIONS FOR USE / ASSEMBLING
WARNING
Prior to installment, use and maintenance of the table frame, any installer and any user of the table must study
this assembly and operation manual carefully, so as to gain a complete understanding of its contents.
EN
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL
ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS
AND WARNINGS REGARDING THE USE OF THIS
PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
IMPORTANT NOTES!
1
Nr. 315640.0
Advertisement
Related Manuals for Touchboards ConSet 501-11
Summary of Contents for Touchboards ConSet 501-11
- Page 1 ELECTRIC HEIGHT ADJUSTABLE TABLE ConSet® - TYPE 501-11 1X138H (CORNER) DIRECTIONS FOR USE / ASSEMBLING WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS WARNING AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY. IMPORTANT NOTES! Prior to installment, use and maintenance of the table frame, any installer and any user of the table must study this assembly and operation manual carefully, so as to gain a complete understanding of its contents.
-
Page 2: Safety And Warnings
TABLE OF CONTENT 1. SAFETY AND WARNINGS 2. USAGE 3. SET UP AND INSTALLATION 4. OPERATION 5. MAINTENANCE AND DEFECTS 6. TECHNICAL DATA 7. PARTS 8. ASSEMBLY DIRECTIONS 9. DECLARATION OF CONFORMITY SAFETY AND WARNINGS This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and table. -
Page 3: Maintenance And Defects
MAINTENANCE AND DEFECTS The table does not require any maintenance by usage as described in chapter 2 in the directions for use. The table is only to be maintained with a wrung cloth. In the event of the occurrence of jarring sounds during operation, STOP using the table and please contact the dealer. -
Page 4: Assembly Directions
8. ASSEMBLY DIRECTIONS b) x 6 c) x 4 continued…. -
Page 5: Declaration Of Conformity
continued….. a) x 18 All 18 pcs. screws a) must be tightened for maximum stability. The table is now assembled. Follow the directions for use in CHAPTER 2. DECLARATION OF CONFORMITY We hereby declare, under our sole responsibility that the following products: ConSet sit and stand tables product type 501-11 which are covered by this statement, are in conformity with the following standards and other normative documents::...