Soundstream Rubicon Balanced X.0 User Manual page 3

2 3 4 5
HIGH PASS INPUT M O N O MONO INPUT
O U T F U T
2
- R E A R
BALANCED X.0
Handcrafted in LEA,
12 13 14 15 16
\
INPUT 5V VARI ON OFF IN OlJT
IN OUT
SUB RE ARF IL1 SUB
LEVEL CONTROL DE-EMPHASIS SONIC
INPUT LEVEL
SUBSONIC LOW PASS
TOP VIEW
23 24 25 26
22
L R
INPUT LEVEL SUBSONIC LOW PASS
FRONT VIEW
6 7 8 9 10 11
HIGH PASS HIGH PASS OUT
GND POWER
R E M O T E
3 WAY
19 20 21
\ \ \ \
0
INPUT ON OFF
2w 3w
S U B INPUT
CONTROL LEVEL
FRONT
HIGH PASS
29 30
27 28
R
FREQ
1.
High Pass Rear Output- Balanced output to the amplifier driving the rear satellite speak-
ers.
2.
Input -
Balanced rear inputs (left and right).
3. Mono 1 Output -
Balanced subwoofer output (Subwoofer Left output in
4.
Mono 2 Output -
Balanced subwoofer output (Subwoofer Right
5.
Input -
Balanced front inputs (left and right).
6. High Pass Front Output -
Balanced front tweeter/satellite output in 3-way mode.
7. High Pass Front Output -
Balanced front midrange / midbass output
front satellite output in 2-way mode.
a. REM Out-
Remote turn-on output to an amplifier. Passes +12V. (Except when powered via
the Mini-Din connector from a RUBICON amplifier.)
9. REM In-
Remote turn-on input from the head unit. Accepts +12V. (Except when powered
via the Mini-Din connector from a RUBICON amplifier.)
10. GND -
Main ground connection. Bolt to a clean chassis ground in the vehicle. (Except
when powered via the Mini-Din connector from a RUBICON amplifier.)
11. Power -
Connected to a fuse or circuit breaker, then to the battery's positive post. (Except
when powered via the Mini-Din connector from a RUBICON amplifier.)
12. Input Overload Indicator -
Rear channels input; Indicates the signal input level or input
gain level is too high.
13. Input Level Switch -
Rear channels input; Select "VARY to use the gain controls, or "W"
to bypass the rear input controls of the BALANCED X.0.
14. Sub Control -
Rear channels input; Select "IN" to send low frequency information from the
rear channels input to the subwoofer mono output.
15. Rear Fill De-Emphasis -
Select "IN" to include de-emphasis in the rear channels high pass
output. (De-emphasis is a 6 dB/octave low pass filter at 7 kHz.)
16.
Subsonic Filter -
Select "IN" to include a subsonic filter in the subwoofer mono output.
17. Input Overload Indicator -
Front channels input; Indicates the signal input level or input
gain level is too high.
18. Sub Control -
Front channels input; Select "IN" to send low frequency information from the
front channels input to the subwoofer mono output.
19. Input Level Switch - Front channels input; Select "VARI" to use the gain controls, or "5V"
to bypass the front input controls of the BALANCED X.0.
20.
Selectable 2-way or 3-way crossover output for the front channels.
21. Power LED -
Indicates the unit is "ON".
22. Input Level -
Rear channels; Independent left and right channel input level controls.
23.
High Pass Crossover Adjustment Pot -
filter on the rear left and right high pass outputs.
24. Subsonic Frequency Adjustment Pot -
25. 12 dB / 24 dB Button - Selectable 12 dB/octave or 24 dB/octave low pass filter for the
subwoofer output. (Note: For 12 dB/octave, use the grey markings on the subwoofer con-
trols. For 24 dB/octave, use the white markings on the subwoofer controls.)
26. Low Pass Crossover Adjustment Pot -
for the subwoofer output.
27. Input Level -
Front channels; Independent left and right channel input level controls.
28.
for the internal bandpass filter for the front channels.
29.
and satellite speakers. Select "x4" for use with midrange drivers and tweeters, and use the
markings written in italics.
High Pass Crossover Adjustment Pot -
30.
filter on the front left and right high pass outputs.
Stereo mode).
output in Stereo mode).
in
Crossover frequency setting for the high pass
Subsonic frequency setting for the subwoofer
Crossover frequency setting for the low pass filter
Crossover frequency setting for the high pass