Advertisement
EXACT5.3
The EXACT5.3 Component Speaker System is the result of highly focused engineering effort.
Each element of the EXACT5.3 represents several advances in automotive speaker technology.
DESIGN
When the EXACT5.3 project was initiated, the following goals were established:
Through extensive testing and development, the EXACT5.3 has been designed to provide
extremely consistent on and off-axis response in the automobile. Installation flexibility and
ergonomics are enhanced by the mounting versatility of both the EXACT5 midrange/woofer and
the EXACT1 tweeter. Finally, the high output capability and low frequency extension of the
EXACT5.3 are atypical of 5" drivers due to the excursion capabilities of the EXACT5 and the
steep crossover slopes of the EXACT5.3X.
These efforts have resulted in an extremely flexible speaker system that performs flawlessly in a
FEATURES
EXACT5 Midrange / Woofer
The EXACT5 represents a departure from typical midrange/midbass drivers by combining
massive midbass and exceptionally smooth midrange.
EXACT1 Soft Dome Neodymium Tweeter
The EXACT1 tweeter is an ultra-high performance 1" Neodymium tweeter designed to deliver
outstanding high frequency reproduction.
EXACT5.3X Passive Crossover Network
The EXACT5.3X Passive Crossover represents a new concept in crossover philosophy. The
EXACT5.3X crossover consists of high quality, multi-element components with two switchable
functions. A three position switch controls the tweeter level and a two position switch controls the
midrange presence. The combination of each allows for a multitude of control options. Dual
inputs allow for multi-channel amp operation of woofer and tweeter circuits.
High performance sound reproduction in the automotive environment
Ease of installation
Superb ergonomics and visual appeal
High output capability
Ability to "tailor" sound to each vehicle
Die-cast Magnesium Frame designed specifically for extra long excursion. Results in higher
output and extended low frequency response.
Copper Inductance Cap for lower distortion and extended high frequency response.
Natural Fiber Cone designed for optimum rigidity and damping with minimal "coloration".
Fourth-generation Neodymium Magnetic Assembly providing performance comparable or
superior to tweeters three times the size.
Specially-treated Textile Dome for a natural, smooth response to 20 kHz.
Ferrofluid-immersed Voice Coil enhances heat dissipation.
24 dB/octave Acoustic Summation Crossover Slopes for smooth response.
Variable Tweeter and Midrange Controls for added flexibility.
Dual Inputs for multi-amp operation and further flexibility.
Dynamic Tweeter Level Control allows for improved power handling and continuous output.
Ultra-low DCR Inductors for minimal signal loss (High power Air-core type in woofer path).
Mylar Film Capacitors to ensure low saturation and accuracy in the high frequencies.
3
Advertisement
