Safety Instructions - infaco POWERCOUP SC160 Assembly Instructions Manual

SAFETY INSTRUCTIONS

BEWARE! In order to reduce the risk of electrical discharge, injury and fire during the use of
electrical tools, please observe the following basic safety measures. Read and follow these
instructions before using the tool, and keep these safety instructions!
When not in operation, the POWERCOUP PW2 handle and its accessories must be
disconnected and stored in their case.
POWERCOUP PW2 handle must always be disconnected from all power sources for to
the following:
- Servicing.
- Charging the battery
- Maintenance.
- Transport.
- Storage.
While the tool is in operation, always remember to keep hands away from the accessory
being used.
Do not use the tool if you are tired or feeling unwell.
Wear recommended safety equipment specific to each accessory.
Do not leave the tool within the reach of children or visitors.
Do not use the tool if there is any risk of fire or explosion- for example in the
presence of flammable liquids or gas.
Never carry the charger by its power cord, and so not pull on the power cord to
unplug it.
Keep the power cord away from heat sources, oil or sharp edges.
Never use the tool at night or in poorly lit conditions without setting up extra lighting.
While using the tool, make sure you keep both feet on the ground and stay well-balanced.
BEWARE!, the extension poles and rake are made out of carbon – a conductive
material. Do not use near electrical wires or other power sources.
Do not let any part of the body come close to the blade.
Do not remove the cut material or hold the material to be cut while the blades are moving.
Make sure the switch is closed when removing jammed material. When working, one
second of distraction can cause an accident leading to serious injuries.
Carry the machine by its handle, with the cutting blade stopped. Always cover the cutting
system with its protective casing during transport or storage. The correct handling of the
saw will reduce the risk of injury from the cutting blades.
Keep the cord away from the cutting zone. When in use, the cord can be hidden in the
shrubs and accidentally cut by the blade.
All manuals and user guides at all-guides.com
17