Advertisement
SPL 69 Wiring Diagram
WIRING
The figure below shows wiring for the SPL 69 speaker. It is
important to make sure that all connections are in phase; that
is positive (+) is connected to positive (+), and negative (-) is
connected to negative (-) since an out-of-phase connection
will cause a dislocated image and low bass output.
suggest using premium cable. The connectors provided with
this system will accommodate wire from 12 gauge to 16
gauge.
69.pub
page 6
Head Unit
Amplifier
6
Friday, September 10, 1999 21:01
We
SPL 69
Advertisement
