Advertisement
Quick Links
INSTALLATION & OPERATION MANUAL
Manually Controlled:
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR
MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
Please call the IKON Service Department and ask for contact information for your local service company.
Gas Countertop Griddle
IMG12
, IMG24 , IMG36 , IMG48 , IMG60
IMG12LP,IMG24LP,IMG36LP,IMG48LP,IMG60LP
(12"Griddle) (24"Griddle)(36"Griddle)(48"Griddle)(60"Griddle)
For Service on Your Gas Griddle:
3560 NW 56th Street
Fort Lauderdale, FL 33309
Tel.: 786.600.4687 / Toll Free: 844.218.8477
Fax.: 786.661.4100
Models:
5659 Royalmount Avenue
Montreal, Qc, Canada H4P 2P9
Tel.: 514.737.9701 / Toll Free: 888.275.4538
Fax.: 514.342.3854 / Toll Free: 877.453.8832
1
Advertisement
Summary of Contents for Ikon IMG12
- Page 1 INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT. For Service on Your Gas Griddle: Please call the IKON Service Department and ask for contact information for your local service company. 3560 NW 56th Street 5659 Royalmount Avenue...
- Page 2 This manual contains important safety instructions which must be strictly followed when using this equipment. Please retain this manual for future reference. Instructions must be posted in a prominent location. All safety precautions must be taken in the event the user smells gas.
-
Page 3: Table Of Contents
Index ATTENTION OWNERS AND OPERATORS....................3 UNPACKING & INSTALLATION....................... WARNINGS & SAFEGUARDS FOR OPERATION ...................6 OPERATING INSTRUCTIONS......................... CLEANING INSTRUCTIONS ........................9 TROUBLESHOOTING ..........................10 LIMITED WARRANTY..........................11... -
Page 4: Attention Owners And Operators
Attention Owners and Operators Equipment is designed to provide safe and productive processing, cooking and warming of food products as long as the equipment is used in accordance with the instructions in this manual and is properly maintained. Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this equipment bear the responsibility to make certain that this equipment is used properly and safely, and to strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law. - Page 5 TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE: · ALWAYS install equipment in a work area with adequate light and space. · ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards. ·...
-
Page 6: Unpacking & Installation
Unpacking & Installation INSTALLATION Read this manual thoroughly before installation and operation. DO NOT proceed with installation and operation if you have any questions or do not understand anything in this manual. Contact your local representative first. 2. Select a location for the Griddle that has a level, solid, nonskid surface that is nonflammable and away from water hazards or sinks, and is in a well-lighted work area away from children and visitors. - Page 7 TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE: For your safety, do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliances. Keep the area free and clear of combustible. (See ANSI Z83. 14B, 1991). Improper installation, adjustment, alteration, service or maintenance of this equipment can cause property damage, personal injury, or death and voids warranty.
-
Page 8: Operating Instructions
Operating Instructions Operating the Griddle - Pilot Lighting Instructions for MANUALLY CONTROLLED Griddles Before operating Griddle, it should be checked to see that it is sitting level. Adjust the feet to level the Griddle. Be sure the catch tray has been properly placed. The pilot light on the appliance have been set at the factory. - Page 9 Operating Instructions Igniting the Burner To ignite the burner, turn knob to the “ON” position. Then back off to the desired flame level. The range of adjustment is virtually infinite between “ON” and “OFF”. The space between the legs at the bottom admits combustion air. DO NOT BLOCK THIS SPACE. All burners are lit from constantly burning pilots.
- Page 10 · DO NOT use any abrasive or flammable cleaning fluids. · DO NOT hose down, immerse or pressure wash any part of the Griddle, excluding the catch tray. · NEVER use a scrubber pad (on all exterior surfaces, except the griddle plate), steel wool or abrasive material, or cleaners containing chlorine, iodine and ammonia or bromine chemicals as these will deteriorate the stainless steel and shorten the life of the unit.
-
Page 11: Troubleshooting
Troubleshooting ISSUE CAUSE SOLUTION Griddle not lighting Main gas line is closed Open valve Pilot light is not lit Ignite pilot light Cause unknown Call for service Flame is too high or too low Adjust flame with control knob Adjustment knob is turned up or down Pilot light not staying lit Flame is too low... - Page 12 Conversion Kit Instructions Gas Countertop Griddle These conversion instructions are for conversion of the GAS GRIDDLE. The instructions provide in this kit are for the conversion of Natural Gas to L.P. gas and refer to the conversion of the unit and kit provided. An authorized licensed technician must be called to perform the complete conversion of the unit.
- Page 13 L.P. Position of insert. Regulator is now converted to L.P. Continue with installation.
- Page 15 IKON Gas Countertop Griddle Model A product with the IKON name incorporates the best in durability and low maintenance. We all recognize, however, that replacement parts and occasional professional service may be necessary to extend the useful life of this unit. When service is needed, contact a IKON Authorized Service Agency, or your dealer.
-
Page 16: Limited Warranty
Limited Warranty IKON warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date whichever date occurs first.
Need help?
Do you have a question about the IMG12 and is the answer not in the manual?
Questions and answers