Table of Contents
Advertisement
IBM_AP500.book Page 1 Monday, November 13, 2000 3:42 PM
Part 2:
Overview
Installing the High Rate Wireless LAN Access Point 500 is easy. Follow the steps below
to power up your wireless network:
1.
Verify Kit Contents.
2.
Write Down Product Specifications.
3.
Connect Cables.
4.
Mounting the Access Point 500.
5.
Power-up your Access Point 500 to start operation.
Note:
Before you start, please consult the flyer "Information to the User" for general
installation and safety instructions.
Verify Kit Contents
Unpack the High Rate Wireless LAN Access Point 500 and verify that all items are
present as pictured in Figure 2-1.
Figure 2-1. Access Point 500 Kit Contents
a.
Access Point 500 unit
b.
Power Adapter
c.
Table mount Bracket
d.
Wall mount Bracket
e.
Quick Start Guide (this document)
f.
CD-ROM containing software & electronic documentation
© Copyright IBM Corp. 2000
Installing your Access Point 500
2-1
Advertisement
Table of Contents
