Advertisement
Congratulations and thank you for purchasing Soundstream products. We are confi-
dent you will enjoy your new subwoofer and appreciate the effort involved in bringing
you the best engineered and crafted subwoofer in this category. Harmonic
indulgence...Listen and feel.
We advise you to keep this manual in a safe and dry place. Write down any important
information to reference from in the future, such as all of your enclosure information.
Draw a simple diagram and write all the parameters of the enclosure incase you ever
need to reference from it in the future.
Specifications
Model
Mounting Depth
Outer Diameter
Cutout Diameter
Driver Displacement
Impedance
RMS Power
PEAK Power
Voice Coil
Magnet Weight
Frequency Response
Resonant Frequency
Qts
Qms
Qes
Vas
XMAX
SPL
NOTICE
The following enclosure recommendations are only a few in variation of what the
woofer requires. If you need specific information for a design and have questions
regarding it, please contact our Technical Support Department with your details, via
email at tech-support@soundstream.com. We strongly suggest you use or build an
enclosure with in the following parameters for proper function and quality results from
your woofer. Building an enclosure too far from the specified suggestions may cause
undesired performance and/or damage to your woofer and in some cases your
amplifier as well.
RW-10
RW-12
6"
6.5"
10.8125"
12.375"
9"
11.125"
.08 cu.ft.
.10 cu. ft.
Dual 4 ohm
Dual 4 ohm
500 watts
600 watts
750 watts
900 watts
2.5"
2.5"
100 oz
120 oz.
30 - 400Hz
30 - 400Hz
25.94Hz
24.75Hz
.418
.467
4.30
3.905
.463
.530
27.24 ltr
58.53 ltr
14 mm
14 mm
82.1 dB
84.23 dB
Sealed Enclosure Recommendations for RW-10
Optimum Enclosure
NET Volume
1 cuft / 28.3 ltrs
Max Power
500 watts
Fill
50% Semi Dense
All volume suggestions are "Net Volume" before any
displacement. Please add accordingly to your design
Sealed Enclosure Recommendations for RW-12
Optimum Enclosure
NET Volume
1.2 cuft / 34 ltrs
Max Power
600 watts
Fill
50% Semi Dense
All volume suggestions are "Net Volume" before any
displacement. Please add accordingly to your design
Vented Enclosure Recommendations for RW-10
Optimum Enclosure
NET Volume
1.25 cuft / 35.4 ltrs
Vent Design
3" X 12.375"
Tuning Freq
32Hz
Max Power
500 watts
All volume suggestions are "Net Volume" before any
displacement. Please add accordingly to your design
Vented Enclosure Recommendations for RW-12
Optimum Enclosure
NET Volume
1.75 cuft / 49.5 ltrs
Vent Design
3" X 9.5"
Tuning Freq
30Hz
Max Power
600 watts
All volume suggestions are "Net Volume" before any
displacement. Please add accordingly to your design
Wiring Configurations
There are a variety of impedance possibilities when using woofers equipped with
multiple coils. It is "EXTREMELY" important that ALL coils are used and none are left as
spares. Always provide the minimum impedance your amplifier requires. If you need
assistance with wiring configurations, please consult a professional installer or
contact our Technical Support Department with your questions.
Other Enclosure Recommendations
Volume
MAX Power
Smallest .7 cuft / 19.8 ltrs
350 watts
Largest
1.4 cuft / 39.64 ltrs
350 watts
Other Enclosure Recommendations
Volume
MAX Power
Smallest .8 cuft / 22.6 ltrs
500 watts
Largest
1.6 cuft / 45.3 ltrs
500 watts
High Output Enclosure
NET Volume
1.75 cuft / 49.5 ltrs
Vent Design
25 sqin X 25"
Tuning Freq
36Hz
Max Power
400 watts
All volume suggestions are "Net Volume" before any
displacement. Please add accordingly to your design
High Output Enclosure
NET Volume
2.25 cuft / 63.2 ltrs
Vent Design
35 sqin X 26"
Tuning Freq
36Hz
Max Power
500 watts
All volume suggestions are "Net Volume" before any
displacement. Please add accordingly to your design
Advertisement
