Summary of Contents for RJG LYNX L-PX
- Page 1 PRODUCT MANUAL PRODUCT MANUAL Lynx™ Proximity Switch Interface L‑PX Training and Technology for Injection Molding...
- Page 2 PRINT DATE 01.27.2023 REVISION NO.
- Page 3 PRODUCT MANUAL Lynx™ Proximity Switch Interface L‑PX INTRODUCTION DISCLAIMER PRIVACY ALERTS PRODUCT DESCRIPTION APPLICATIONS OPERATION INSTALLATION STANDARD INSTALLATION MAINTENANCE CLEANING TESTING & CALIBRATION TESTING CALIBRATION WARRANTY RJG, INC. STANDARD ONE‑YEAR WARRANTY PRODUCT DISCLAIMER Product Manual | Lynx™ Proximity Switch Interface L-PX...
-
Page 4: Table Of Contents
PRODUCT MANUAL Lynx™ Proximity Switch Interface L‑PX TROUBLESHOOTING COMMON ERRORS SIGNAL ERRORS CUSTOMER SUPPORT RELATED PRODUCTS COMPATIBLE PRODUCTS LYNX CABLES CE‑LX5 eDART PROCESS CONTROLLER COPILOT SYSTEM APPLICATION PROCESSOR AP4.0 SIMILAR PRODUCTS LYNX SHIELDED SEQUENCE MODULE ID7‑M‑SEQ Lynx™ Proximity Switch Interface L-PX | Product Manual... - Page 5 This guide must be kept available for reference at all times. DISCLAIMER PRIVACY Inasmuch as RJG, Inc. has no control Designed and developed by RJG, Inc. over the use to which others may put Manual design, format and structure this material, it does not guarantee that copyright 2023 RJG, Inc.
- Page 6 NOTES Lynx™ Proximity Switch Interface L-PX | Product Manual...
- Page 7 L‑PX can be used to acquire the mold‑clamped signal when one cannot be obtained using the RJG Lynx Shielded Sequence Module ID7‑M‑SEQ, or an ID7‑M‑SEQ is not used. The mold‑clamped signal is required for the eDART and CoPilot systems to compute cycle time, and is also used by the systems to zero (reset) sensors.
- Page 8 NOTES Lynx™ Proximity Switch Interface L-PX | Product Manual...
- Page 9 INSTALLATION The proximity switch and brackets are Use the included magnets to position the positioned on the mold using the provided target bracket on the moving half; adjust magnets. Once an appropriate installation the target bracket as close as possible to is templated, the magnets are removed and the proximity switch (less than 0.1”...
- Page 10 NOTES Lynx™ Proximity Switch Interface L-PX | Product Manual...
- Page 11 RJG, INC. STANDARD ONE‑YEAR installed in areas free from oil, dirt, grime, WARRANTY and grease. RJG, Inc. is confident in the quality and RJG, Inc. recommends the following robustness of the L‑PX, and so are offering cleaners: a one‑year warranty. RJG’s proximity switch •...
- Page 12 NOTES Lynx™ Proximity Switch Interface L-PX | Product Manual...
-
Page 13: Troubleshooting
TROUBLESHOOTING COMMON ERRORS SIGNAL ERRORS 2. Signal is intermittent 1. No signal is detected by the eDART or CoPilot system If the signal is detected by the eDART or CoPilot system intermittently, ensure the If no signal is detected by the eDART or following: CoPilot system, ensure the following: •... -
Page 14: Customer Support
CUSTOMER SUPPORT Contact RJG’s Customer Support team by phone or email. RJG, Inc. Customer Support P: 800.472.0566 (Toll Free) P: +1.231.933.8170 email: support@rjginc.com www.rjginc.com/support Lynx™ Proximity Switch Interface L-PX | Product Manual... -
Page 15: Related Products
RELATED PRODUCTS The shielded sequence module is compatible with other RJG, Inc. products for use with the eDART and CoPilot process control and monitoring systems. COMPATIBLE PRODUCTS LYNX CABLES CE‑LX5 The Lynx sensor cable ( at right) is a polypropylene‑coated cable suited for the heat and stress found in injection molding environments. -
Page 16: Similar Products
SIMILAR PRODUCTS The following product, similar to the L‑PX, is compatible for use with the eDART or CoPilot process control and monitoring systems. LYNX SHIELDED SEQUENCE MODULE ID7‑M‑SEQ The Lynx shielded sequence module ID7‑M‑SEQ ( at right) is a DIN‑rail‑mounted module that is wired to the molding machine in order to collect 24 V DC timing signals for use with the eDART system, including injection forward,... - Page 18 P +39 335 178 4035 P +01 231 947‑3111 sales@it.rjginc.com F +01 231 947‑6403 it.rjginc.com sales@rjginc.com www.rjginc.com MEXICO RJG MEXICO SINGAPORE RJG (S.E.A.) PTE LTD Chihuahua, Mexico Singapore, Republic of P +52 614 4242281 Singapore sales@es.rjginc.com P +65 6846 1518 es.rjginc.com sales@swg.rjginc.com en.rjginc.com...
Need help?
Do you have a question about the LYNX L-PX and is the answer not in the manual?
Questions and answers