Origin Instruments Orby Information Manual

Orby Switch Information Guide
Thank you for choosing Orby switch!
Easy Installation
Orby utilizes the industry standard 3.5-mm plug. Simply plug Orby into the 3.5-mm
jack on a switch-adapted device.
Important Note: A switch interface is usually required for connectivity to computers.
( We recommend our Swifty and Tapio USB Switch Interfaces.)
Simple Operation
To activate your Orby, simply press anywhere on
the top activation surface.
When pressed or released, you will hear a clear
and audible "click".
Attaching High-Tack Friction Pad
The included high-tack friction pad can optionally be attached to the Orby base for
stability and is held in place with pressure sensitive adhesive. To attach pad:
 Remove paper backing from pad to expose adhesive
 Orient pad cutouts to align with Orby threaded inserts
 Press pad into place
Orby Switch Information Guide
Thank you for choosing Orby switch!
Easy Installation
Orby utilizes the industry standard 3.5-mm plug. Simply plug Orby into the 3.5-mm
jack on a switch-adapted device.
Important Note: A switch interface is usually required for connectivity to computers.
( We recommend our Swifty and Tapio USB Switch Interfaces.)
Simple Operation
To activate your Orby, simply press anywhere on
the top activation surface.
When pressed or released, you will hear a clear
and audible "click".
Attaching High-Tack Friction Pad
The included high-tack friction pad can optionally be attached to the Orby base for
stability and is held in place with pressure sensitive adhesive. To attach pad:
 Remove paper backing from pad to expose adhesive
 Orient pad cutouts to align with Orby threaded inserts
 Press pad into place