IBM Intel PRO/100 SP User Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Laptop Accessories
  5. Intel PRO/100 SP
  6. User manual
IBM Intel PRO/100 SP User Manual

IBM Intel PRO/100 SP User Manual

Mobile combo adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
Intel
PRO/100 SP
Mobile
Combo Adapter
User's Guide
OPTIONS
by IBM
Get other manuals https://www.bkmanuals.com

Advertisement

Table of Contents
loading

Related Manuals for IBM Intel PRO/100 SP

Summary of Contents for IBM Intel PRO/100 SP

  • Page 1 ® Intel PRO/100 SP Mobile Combo Adapter User’s Guide OPTIONS by IBM Get other manuals https://www.bkmanuals.com...
  • Page 2 “Appendix E. Product warranty and notices” on page E-1. First Edition (February 2001) © Copyright International Business Machines Corporation 2001. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Get other manuals https://www.bkmanuals.com...

  • Page 3: Table Of Contents

    . B-1 Appendix C. Specifications . . C-1 Appendix D. Help and service information . . D-1 Appendix E. Product warranty and notices . E-1 Appendix F. User notices . . F-1 © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 4 ® Intel PRO/100 SP Mobile Combo Adapter: User’s Guide Get other manuals https://www.bkmanuals.com...

  • Page 5: Safety: Read First

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Lees voordat u dit product installeert eerst de veiligheidsvoorschriften. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 6 Antes de instalar este produto, leia as Informações sobre Segurança. Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy. Antes de instalar este producto lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. ® Intel PRO/100 SP Mobile Combo Adapter: User’s Guide Get other manuals https://www.bkmanuals.com...

  • Page 7: About This Book

    Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the IBM Web site at http://www.ibm.com/pc/register...
  • Page 8 ® viii Intel PRO/100 SP Mobile Combo Adapter: User’s Guide Get other manuals https://www.bkmanuals.com...

  • Page 9: Part 1: Installation And User's Guide

    Installing Ethernet and modem device drivers PCI Ethernet Controller driver and Lucent Win Modem driver installation procedures are included for: v Windows Me v Windows 2000 v Windows 98 v Windows 95 v Windows NT 4.0 © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 10 Installing the Ethernet and modem device drivers in Windows Me To install the PCI Ethernet Controller device driver and the Lucent Win Modem device driver in Windows Me, do the following: Note: Use the Add New Hardware Wizard for installing only the PCI Ethernet Controller.
  • Page 11 7. Click Next. 8. Select The Updated Driver (Recommended) and click Next. 9. If the displayed driver is Intel PRO/100 SP Mobile Combo Adapter, click Next; otherwise click Back and repeat Step 8. 10. At the Insert Disk window, click OK.
  • Page 12 The Installing Modem Drivers window opens and the Wizard finds a Lucent Win Modem. 17. Restart the computer to finish the Lucent Win Modem installation. Installing the Ethernet and modem device drivers in Windows 95 To install the PCI Ethernet Controller device driver and the Lucent Win Modem device driver in Windows 95, do the following: Note: You will need your Windows 95 installation CD or diskette to install the device driver.
  • Page 13 14. Click Start→Run. 15. Enter x:\modem\win9x\setup.exe where x is the drive letter of the CD-ROM drive. 16. Follow the instructions on the screen. 17. Restart the computer. As you configure your communication software, you will be prompted to select a modem. 18.
  • Page 14 5. Click Select from list. 6. Click Have Disk. 7. In the Insert Disk window, type the location of the CD-ROM drive. The ® Ethernet Adapter displays on the Select OEM Option window as ‘‘IBM ® Intel 10/100 Ethernet Adapter.’’...
  • Page 15 4. In the Country/Region section, select the region where you are going to use the modem. The regions where IBM supports the use of your modem are listed in the online manual. If you select a region not on that list, your modem might not work correctly.
  • Page 16 The adapters must support 802.1p. ACPI Wake On LAN ® Enables or disables the Magic Packet service for IBM Wake on LAN when used in Windows 98 Version 4.10.1998 without the Service Pack. If you are using a later version of Windows 98, or have Service Pack 1 or later installed, this option will be ignored and the ACPI Wake on LAN services will be used.
  • Page 17 1. From the Windows 98 desktop, right-click on My Computer and choose Properties. 2. The System Properties window opens. Your Windows 98 version is listed under System. Enable PME Use this setting to adjust the power management compatibility of the adapter. The default setting is Disable.
  • Page 18 Although this is the safest setting, the best performance is achieved when the threshold parameter is as low as possible without producing underruns. To experiment, set the parameter to 16. Then, if performance drops significantly, increase the value in small increments. Coalesce Buffers The rcommended value is 8 with a range of 1–32.
  • Page 19 requires only one PCI transaction, the PCI bus is more efficient, but transmit time is slightly longer. When the option is disabled, the packets are not coalesced, and each packet requires several PCI transactions. The PCI bus is less efficient, but transmit time is faster. Receive Buffers The recommended value is 32 and the range is 1–1024.
  • Page 20 When traffic is prioritized at the host or entry point of the network, network devices can base forwarding decisions on priority information defined in the packet. Priority Packet prioritizes traffic on the basis of priority filters—parameters you assign to be applied to outgoing (transmit) packets. Using the Priority Filter Wizard, you can set up predefined or custom priority filters on the basis of node (MAC) address, Ethernet type, or various properties of the protocol and port.
  • Page 21 Wake on LAN The Wake on LAN (WOL) feature operates according to a published specification. In simple terms, the specification enables designers to build network adapters that are capable of “listening” to network activity even when the computer is turned off. WOL adapters have a special low-power standby mode that is active when the rest of the computer is without power.
  • Page 22 A Boot Agent software image integrated into the adapter’s flash ROM device. IBM may occasionally provide Boot Agent software updates. A Boot Agent software update package consists of: v A Boot Agent software image that can be loaded onto your client network adapter’s flash ROM device.
  • Page 23 Configuration Setup The Boot Agent software provides configuration options that allow you to customize the behavior of the Boot Agent software. Changing the Boot Agent configuration will usually be required only the first time you add a new network adapter to a client computer within your network. You can configure the Boot Agent within any of the following environments: v Pre-boot environments (before operating system is loaded) v Windows environments...
  • Page 24 ® 1-16 Intel PRO/100 SP Mobile Combo Adapter: User’s Guide Get other manuals https://www.bkmanuals.com...

  • Page 25: Appendix A. Troubleshooting

    This is not a problem. If you have not connected the network operation from cable, the computer queries the Ethernet until the timeout timer hibernation or is reached. Connect the network. suspend mode takes a long time. © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 26 The cable is connected to the modem card correctly. device driver. v You selected Intel PRO/100 SP Mobile Combo Adapter application setting. v You are using the driver that is on the device drivers CD shipped with the combo card.

  • Page 27: Appendix B. Modem Function

    PWM Call Monitor interface with volume control and on/off control via AT commands Dial tone detection for all supported countries Tone and Pulse dialing support [Pulse dialing supported in all countries except those requiring pulse clamping] © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 28 Table 3: Supported Functions Separate Homologation Country parameters in binary file [Except OS/2] CLKRUN# support. CLKRUN# should not be asserted if no data transaction for modem (or LAN) NT 4.0 APM Support through TP port DD for Windows NT 4.0 with the latest service pack Note: Meter Tone (billing tone) filtering for Switzerland and Germany is not included and must be provided by the user.
  • Page 29 Table 4: AT Command Set Summary. The following table is from Lucent Technologies, Host-Based Controller Modem AT Command Set, Version 1.1, June 15, 1998. Command Description Command Description Monitor speaker mode \A MNP block size Modulation Send break handshake Return to online data Modem port flow control Select pulse dialing Adjust bits/s rate control...
  • Page 30 Table 5: The S-Register Summary. The S-registers 42 and 43 are for testing and debugging purposes only. Register Default Description Automatic disconnect delay DTMF dialing speed Escape guard time General bit-mapped options status V.24 bit-mapped options status Results bit-mapped options status Timer to control sleep mode V.34 modulation enable/disable Inactivity timer...
  • Page 31 To modify the value of an S-register: TYPE: ATSn = r where n is the register number, and r is the new register value. PRESS: Enter S0 Auto Answer Ring Number This register determines the number of rings the modem will count before automatically answering a call.
  • Page 32 S3 Command Line Termination Character (user defined) This register determines the ASCII values as the carriage return character. This character is used to end command lines and result codes. Range: 0-127, ASCII decimal Default: 13 (carriage return) Units: ASCII Note: This register value is not stored with &W command. S4 Response Formatting Character (user defined) This register determines the ASCII value used as the line feed character.
  • Page 33 S6 Wait Before Dialing This register sets the length of time, in seconds, that the modem must wait (pause) after going off-hook before dialing the first digit of the telephone number. The modem always pauses for a minimum of two seconds, even if the value of S6 is less that two seconds.
  • Page 34 Units: seconds S10 Automatic Disconnect Delay This register sets the length of time, in tenths of a second, that the modem waits before hanging up after a loss of carrier. This allows for a temporary carrier loss without causing the local modem to disconnect. The actual interval the modem waits before disconnecting is the value in register S10.
  • Page 35 0 = Numeric (V0) 1 = Verbose (Vl) (Default) Bit 6 Pulse dial PPS selection (&Pn) 0 = 10 PPS (&p0, &p1) (Default) 1 = 20 PPS (&p2) Default: 8 (00001000b) S21 V.24/General Bit Mapped Options Status Indicates the status of command options. Only bits 3, 4, and 5 are used, read-only.
  • Page 36 5 = X2 selected 6 = X3 selected 7 = X4 selected (Default) Bit 7 Pulse dial make/break ratio (&Pn) 0 = 33/67 make/break ratio (&P1, &P2) (Default) 1 = 39/61 make/break ratio (&P0) Default: 112 (01110000b) S24 Timer to Control Sleep Mode This command displays the number of seconds of inactivity (no characters sent from the DTE, no RING) in the off-line command state before the modem places itself into standby mode.
  • Page 37 Range: 0-255 Default: 0 S32 Synthetic Ring Volume This register specifies a synthetic ring volume. Range: 0-255 (allowed, but not meaningful) Default: 10 S33 Synthetic Ring Frequency This register specifies a synthetic ring frequency. There are five choices, with 0 meaning disabled.
  • Page 38 S37 = 4 reserved S37 = 5 1200 bit/s S37 = 6 2400 bit/s S37 = 7 4800 bit/s S37 = 8 7200 bit/s S37 = 9 9600 bit/s S37 = 10 12000 bit/s S37 = 11 14400 bit/s S37 = 12 16800 bit/s S37 = 13 19200 bit/s S37 = 14 21600 bit/s S37 = 15 24000 bit/s...
  • Page 39 S38=3 34 kbit/s S38=4 36 kbit/s S38=5 38 kbit/s S38=6 40 kbit/s S38=7 42 kbit/s S38=8 44 kbit/s S38=9 46 kbit/s S38=10 48 kbit/s S38=11 50 kbit/s S38=12 52 kbit/s S38=13 54 kbit/s S38=14 56 kbit/s The number of robbed-bit signaling (RBS) frames detected decreases the true DCE rate per the following table: Table 6: Effect of RBS Frames on DCE Rate RBS Links...
  • Page 40 One special value of S38, S38 = 251, is used for back-to-back (factory) testing of V.34 rates, with DSP code running in external memory. Set S38=251 on both originating and answering modems. (This feature is not valid with ramless solution.) S42 Auto Rate (default 1, range 0-1) This command is used for testing and debugging only.
  • Page 41 Table 7: S36 and S48 Configuration Settings S48 = 7 S48 = 128 S36 = 1, 3 LAPM or async async S36 = 4, 6 LAPM, MNP, or hangup MNP or hangup S36 = 5, 7 LAPM, MNP, or async MNP or async S89 Timer to Control Sleep Mode This command displays the number of seconds of inactivity (no characters sent...
  • Page 42 S108=33 A-law S108=7 default, or any other value: Coding as specified by digital modem in V.8bis information. If an old server does not tell its code type in V.8bis, then the client modem chooses based on its country ID. m-law regions are Japan, Taiwan, Korea, Hong Kong, North America, and Latin America.

  • Page 43: Appendix C. Specifications

    Media (Cable) Connectors and Wiring RJ45 Use Category 5 TPE cabling at 100 Mbps Supports 100BASE TX Fast Ethernet Data Rate Mode 10 or 100 Mbps Standards Conformance IEEE 802.3, IEEE 802.3x, IEEE 802.1p, IEEE802.1Q © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 44 Table 9: Specifications Feature Value Diagnostic Software On-board PROSet Responder Duplex mode Full duplex / Half duplex ® Intel PRO/100 SP Mobile Combo Adapter: User’s Guide Get other manuals https://www.bkmanuals.com...

  • Page 45: Appendix D. Help And Service Information

    During the warranty period, assistance for replacement or exchange of defective components is available. In addition, if your IBM option is installed in an IBM computer, you might be entitled to service at your location. Your technical support representative can help you determine the best alternative.
  • Page 46 For the support telephone number and support hours by country, refer to the following table or to the enclosed technical support insert. If the number is not provided, contact your IBM reseller or IBM marketing representative. Response time may vary depending on the number and nature of the calls received.

  • Page 47: Appendix E. Product Warranty And Notices

    1. The warranties provided by IBM in this Statement of Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The term ″Machine″ means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
  • Page 48 If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.
  • Page 49 To obtain warranty service for the Machine, contact your reseller or IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344. (In Toronto, call 416-383-3344.) You may be required to present proof of purchase. IBM or your reseller provides certain types of repair and exchange service, either at your location or at a service center, to keep Machines in, or restore them to, conformance with their Specifications.
  • Page 50 IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges. Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason.
  • Page 51 If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.
  • Page 52 Machine set-up and installation, will be provided WITHOUT WARRANTIES OF ANY KIND. Warranty Service To obtain warranty service for the Machine, contact your reseller or IBM. You may be required to present proof of purchase. IBM or your reseller provides certain types of repair and exchange service, either at your location or at a service center, to keep Machines in, or restore them to, conformance with their Specifications.
  • Page 53 IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.
  • Page 54 Specified Operating Environment, improper maintenance by you, or failure caused by a product for which IBM is not responsible. Limitation of Liability: The following is added to this Section: Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974, IBM’s liability is limited to the repair or replacement of the goods or the...
  • Page 55 Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides, if you require the goods for the purposes of a business as defined in that Act.
  • Page 56 EGYPT: Limitation of Liability: The following replaces item 2 in this Section: 2. as to any other actual direct damages, IBM’s liability will be limited to the total amount you paid for the Machine that is the subject of the claim.
  • Page 57 ITALY: Limitation of Liability: The following replaces the second sentence in the first paragraph: In each such instance unless otherwise provided by mandatory law, IBM is liable for no more than: (item 1 unchanged) 2) as to any other actual damage arising in all situations involving non-performance by IBM pursuant to, or in any way related to the subject matter of this Statement of Warranty, IBM’s liability, will be limited to the total amount you paid for the...
  • Page 58 The following replaces the second paragraph of this Section: Unless otherwise provided by mandatory law, IBM and your reseller are not liable for any of the following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or your reseller is informed of their possibility.
  • Page 59 IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
  • Page 60 Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are trademarks of the IBM Corporation in the United States, other countries or both: HelpCenter Wake on LAN Intel is a trademark of the Intel Corporation in the United States other countries, or both.
  • Page 61 IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.
  • Page 62 IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards. This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22/European Standard EN 55022.
  • Page 63 Note: If the device is an internal modem, a second FCC registration label is also provided. You may attach the label to the exterior of the computer in which you install the IBM modem, or you may attach the label to the external DAA, if you have one. Place the label in a location that is easily accessible, should you need to provide the label information to the telephone company.
  • Page 64 5. If you experience trouble with this product, contact your authorized reseller, or call IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344. You may be required to present proof of purchase.
  • Page 65 Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
  • Page 66 EUROPE (Directive 1999/5/EC) Declaration of Conformity We, Intel Corporation, declare under our sole responsibility that the product: - Name/Machine Type: Intel PRO/100 SP Mobile Combo Adapter - Hardware Part/Number: PBA A30469-007 - Software version: 5.85 To which this declaration relates; is in compliance with the essential requirements and other relevant provisions of the European Directive.
  • Page 67 Network Compatibility Declaration This equipment is intended for connection to the Public Switched Telephone Network, and supports both DTMF signalling and pulse dialing for the network addressing. It has been designed to be compatible and interwork with the European networks in EC and EFTA countries, which are: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.
  • Page 68 Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Tel ecom’s network services. Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specification: There shall be no more than 10 call attempts to the same number within...

  • Page 69: Appendix F. User Notices

    (PSTN). Please connect the cable from the A30469 with the wired plug connector code F with the wire down in the wall socket (TAE 6) code F. The A30469 can be used as a single device. © Copyright IBM Corp. 2001 Get other manuals https://www.bkmanuals.com...
  • Page 70 ® Intel PRO/100 SP Mobile Combo Adapter: User’s Guide Get other manuals https://www.bkmanuals.com...
  • Page 71 Get other manuals https://www.bkmanuals.com...
  • Page 72 Part Number: 06P3814 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. (1P) P/N: 06P3814 Get other manuals https://www.bkmanuals.com...

Table of Contents