List of Components of the Appliance ............. 10 Functions of the Appliance ..............10 Installation and operation ................11 Installation ....................11 Operation ....................12 Cleaning ...................... 15 Safety Instructions for Cleaning ............. 15 Cleaning ....................15 Disposal ....................... 16 X1008 1 / 18...
You must strictly follow the instructions, to prevent accidents, personal injuries and property damages. DANGER! The signal word DANGER warns against hazards that lead to severe injuries or death if the hazards are not avoided. 2 / 18 X1008...
Do not transport the appliance, holding it by the power cord. • Do not allow the power cord to come into contact with heat sources or sharp edges. • Do not bend, pinch nor knot the power cord. X1008 3 / 18...
Page 6
It is prohibited to sprinkle hot surfaces with cold water or flammable liquids. Health hazard due to germs! • The mixing beaker must be periodically emptied, cleaned, and disinfected to eliminate the possibility of growth of harmful germs. Supervised Usage only • Only supervised appliance may be used. 4 / 18 X1008...
Page 7
• The appliance may only be used clean. • Use only original spare parts. Never attempt to repair the appliance on your own. • Do not attempt to modify nor alter the appliance. X1008 5 / 18...
The following is an unintended use: – boiling of liquids containing sugar, sweeteners, acids, lyes, or alcohols; – storing and heating up flammable, harmful, and quickly evaporating liquids or materials, etc. 6 / 18 X1008...
Declaration of Conformity The appliance meets the currently applicable standards and guidelines of the European Union. We confirm the above in the EC Declaration of Conformity. We may provide relevant Declaration of Conformity upon request. X1008 7 / 18...
– in a location protected against mechanical shocks. In the case of extended storage (over three months), make sure you check the condition of the packaging and the parts regularly. If needed, replace the packaging with a new one. 8 / 18 X1008...
Technical Data Technical Data Technical Specifications Name: Milk frother 0,75L X1008 Art. No.: Material: Stainless steel Volume, in l: 0,75 Temperature range, min.–max., in °C: 0 - 70 Max. filling level when frothing milk, in ml: Max. filling level when heating up milk, in...
With the milk frother you may prepare warm, frothed milk for cappuccino and latte macchiato or cold, frothed milk for ice coffee. Moreover, with the milk frother, you may heat up milk or milk with powdered chocolate. 10 / 18 X1008...
Halten Sie z u Wänden s eitlic h und hinten oder z u anderen Geg ens tänden einen ausr eichenden Abs tand ein, um di e Einwir kung von Hitz e z u ver mei den. Falls di es nic ht möglich is t, bringen Sie Sc hutz vorrichtungen an, z.B. Foli en aus hitz ebes tändigem M ateri al. • Leave at least 10 cm clearance from flammable walls and items. X1008 11 / 18...
1. Preparation of hot, frothed milk for cappuccino. 2. Preparation of hot, frothed milk for latte macchiato. 3. Preparation of hot milk or milk with powdered chocolate. 4. Preparation of cold, frothed milk for ice coffee. 12 / 18 X1008...
Page 15
Note! Maximum filling level for milk frothing and for preparation of hot chocolate is 250 ml (bottom marking). Maximum filling level for preparation of hot milk is 500 ml (top marking). Fig. 1 X1008 13 / 18...
Page 16
6. Select the key with the suitable function. The indicator light lights up red during operation. When the process finishes, the appliance switches off automatically. 7. Pour the frothed milk or hot milk into a suitable container. Fig. 3 14 / 18 X1008...
Do not hold the motor block under running water. 4. After cleaning, dry the base, lid and mixing disks with a soft, damp cloth. 5. After use, leave the heating plate to cool down. 6. Wipe the heating plate with a soft, damp cloth. X1008 15 / 18...
You must not dispose of electric appliances with household waste. Disconnect the appliance from the power supply and remove power cord from the appliance. Electrical appliances should be returned to designated collection points. 16 / 18 X1008...
Need help?
Do you have a question about the X1008 and is the answer not in the manual?
Questions and answers