Table of Contents
Advertisement
b
The product must be stored in a dry place where it is not subject to frost. The product must be installed where it is
protected against splashes of water. Ambient temperature in the place of installation must not exceed 40°C during
functioning of the product.
b
It is recommended to install the product as near as practical to the storage cylinder in order to avoid unnecessary
heat loss from the connecting pipes.
WALL MOUNTING
b
Handle with care!
Remove the product from its packaging and remove the
polypropylene cover.
- Unscrew the screws (2) and remove the mounting bra-
cket (3) from the rear of the product.
- Fix the mounting bracket (3) to the wall with 12 mm wall
plugs (not supplied).
b
Make sure that the bracket (3) is perfectly vertical.
3
2
9
2
Advertisement
Table of Contents
